1 / 9
Aluminum Nicotine Can Laser Jig + Rotary Attachment (3 Mount Styles) — zdjęcie 1
1 / 9

Aluminum Nicotine Can Laser Jig + Rotary Attachment (3 Mount Styles)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dial in those aluminum ZYN / nicotine cans with a fast, repeatable jig system. Three mounting styles plus a rotary attac

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Dial in those aluminum ZYN / nicotine cans with a fast, repeatable jig system. Three mounting styles plus a rotary attachment option so you can run cans upright, upside down, or on their side for wrap-style engraving.

Overview

I needed a reliable jig for aluminum ZYN / nicotine can jobs, so I built one that plays nicely with just about any laser setup.

This 3D-printable jig lets you:

Run cans upright, upside down, or on their side

Do wrap-style and multi-position engraves

Lock in repeatable alignment so every can hits the same spot

Speed up your workflow for both one-off customs and production runs

These have been solid sellers with the right graphics, and this jig makes the workflow fast, consistent, and easy to scale.

What’s Included

You get 3 main mounting styles:

6.5 mm rail version

Designed to slide or clamp onto a 6.5 mm style rail system.

Great for users who already have rail-based fixture setups.

5 mm holes, 25 mm on-center version

Rotary Attachment version (two variants for xTool R2A-style rotary)

Designed to mount on a rotary so you can support cans on their side.

Perfect for wrap-style engraves and multi-position designs.

Use double-sided tape to secure the can to the jig and spin it, baby, spin it…

If you’re running a CO₂ laser and prefer a magnet-bottom version, reach out — I’m planning a CO₂-specific magnetic base as well.

Compatible Cans & Business Use

Built for aluminum ZYN / nicotine-style cans

Ideal for:

Laser businesses offering custom nicotine cans

Gift shops, smoke shops, dispensaries, and event merch

Small shops wanting a repeatable, production-friendly setup

You can typically source blank aluminum cans on Alibaba / AliExpress in the $9–$12 range.

With good graphics and clean engraving, these cans often retail for around $35 each, so this jig is built with small business profitability in mind.

Digital download only – no physical jig or cans included

Scale is set up for typical aluminum ZYN-style cans – you can tweak scale slightly if your specific can dimensions differ.

License & Notes

Please do not redistribute or resell the digital 3D files themselves.

https://songdawgdesigns.com/shop

Etsy shop (finished files & jigs):
https://songdawgdesigns.etsy.com

Patreon:
https://www.patreon.com/c/SongDawgDesigns

If you have any questions, need a tweak for your bed layout, or want a dedicated CO₂ magnet version, send me a message and I’ll help you get dialed in.

3D printing settings

10% infill

Tagi