Open-Grid Tera Barcode Scanner Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A specific holder for the Tera Barcode scanner I have. Also holds the manual on the side.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a very specific holder for the Tera D5100 Wireless 2D Barcode Scanner I have. The manual have very important settings barcode in it, so I made a holder that have a side slot for holding that as well.
The mounting is with multi-connect onto opengrid. I leave spot for 6 but usually only 2 multi-connect is enough. (The multi-connect on the back is from my other upload: Polygon Multiconnect)
Onshape file included if anyone want to re-model it base on their scanner's dimention. https://cad.onshape.com/documents/80d95b77827016b7f81f17dd/w/14e377e78a3f29638185883e/e/5cb0ad79639be5f281b73127?renderMode=0&uiState=6970313db408e02cb81c9028