Ducati Hypermotard 1100 Tail Tidy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tucked in and minimalist tailtidy to suit 190mm licence plates for the original Hypermotard
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Bike is a bit old to still have good tailtidy options, and the universal fits are too bulky.
This one is designed to fit the small 190mm Australian plates and tuck in a standard 8mm indicator as well as a trailer licence plate light with 50mm screw holes. Attaches to the same location as the original.
Print in something high-temp resistant, I did PPA-CF, recommend 4 walls, 50% grid infil for good strength. No supports needed, then use M3 heatset inserts to attach the plate holder to the light mount, and I put some heat reflective tape on for good measure.
Mine has done 500km in high temps and been fine!