Ducati Hypermotard 1100 Tail Tidy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tucked in and minimalist tailtidy to suit 190mm licence plates for the original Hypermotard
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Bike is a bit old to still have good tailtidy options, and the universal fits are too bulky.
This one is designed to fit the small 190mm Australian plates and tuck in a standard 8mm indicator as well as a trailer licence plate light with 50mm screw holes. Attaches to the same location as the original.
Print in something high-temp resistant, I did PPA-CF, recommend 4 walls, 50% grid infil for good strength. No supports needed, then use M3 heatset inserts to attach the plate holder to the light mount, and I put some heat reflective tape on for good measure.
Mine has done 500km in high temps and been fine!