drainers for bottles (bottle -> cup & bottle -> bottle)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ever tried to completely drain a bottle with a low viscous fluid (e.g. silicone -> expensive!)? print it - srew it on…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 1982
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Ever tried to completely drain a bottle with a low viscous fluid (e.g. silicone -> expensive!)?
print it - srew it on - put it on a cup or another bottle and let it drain
dimensions
outer diameter of bottle thread: 26.65mm
inner thread diameter: 24,4mm
thread pitch: 4mm
thread length: 13mm (25mm for bottle-bottle)
groove for cup (bottle to cup version):
outer: 91mm
inner: 81mm
If you're asking yourself why I designed 2 parts instead of one which fullfils both jobs: if I would have made the thread of the bottle->cup 25mm you would have drops of your liquid in the thread when draining in a cup... ;-)
Instructions
Take care if you have a 2 compound Silicone / fluid as I have: NEVER mix the drainers as your liquid my starting to cure.
...print 2 and mark them properly....
Category: Gadgets