P
Printables
Brake fluid reservoir cover
Kann ohne weiteres Zubehör montiert werden, Originalschraube ist lang genug.
Wyniki wyszukiwania: fluid
Liczymy pasujące modele…
P
Printables
Large Fluid Pencil Stand
The Large Fluid Minimalist Pencil Stand, a sleek and elegant accessory designed to bring a touch of softness and sophistication to your workspace. With its smooth, rounded edges and fluid design, this stand holds up to 10 pencils or pens,…
P
Printables
Pibot FluidNC enclosure
Enclosure similar to the acrylic one available on the pibot website. Added more openings for high power connector. No fan.
P
Printables
Microfluidic Test Strip Fixture
This is a fixture used to hold a strip of paper-based microfluidic chips to assist with photo color analysis.
P
Printables
Sci-Fi Fluid tank 32mm scale
Sci-Fi Fluid tank that can hold a miniature, add transparent plastic and you got yourself a great piece of terrain
P
Printables
Ford Windshield Washer Fluid Cap
Slicer: Cura Material: PETG (CRON) 🔧 Nozzle & Layer - Nozzle Diameter: 0.4 mm - Layer Height: 0.16 mm - Initial Layer Height: 0.16 mm 🌡 Temperatures - Nozzle Temperature: 235 °C - Bed Temperature: 80 °C 🚀 Speeds - Print Speed: 32.5 mm/s -…
P
Printables
Washer Fluid Splitter: Check Valve Stems
Have you lightly bumped your washer check valve by accident while looking at the fuse box and the stems disintegrated into dust like the Curse of Ra was cast upon them? Well fear not, just print these replacement stems and slide them over…
P
Printables
Modern Gold Fluid Wave Vase
Enjoying this model? If you download it, please consider leaving a like and hitting that follow button. It’s the best way to say thanks for the free design! Thank you! Mate / Kkmmedia3D Organic Modern Elegance Introduce a sense of…
P
Printables
Mazda 3 BL (FL) Washer fluid cap
Windshield washer cap for Mazda 3 BL (FL). This model is perfect for anyone needing a replacement cap. Printed in PLA fits perfectly on default settings. This cap should also fit any other vehicle where the washer fluid neck has a outside…
P
Printables
Window Washer Fluid Cap Honda CRV 2006
EDIT: Hey, this has been remixed, and the remix is better ! (Thanks D Rogers!) -Iggy. Just a cap that I whipped up for the above mentioned vehicle. I am 90% certain the oil change guy flipped the cap up, the retaining thingy snapped, and…
P
Printables
Windshield wiper fluid cap compatible with 2016 Honday Odyssey
We lost our windshield wiper fluid cap. I designed and vase-mode printed a new cap that should pop over the top of the fill tube. The fit was pretty tight. I set the extrusion width to .8mm in the vase mode print and had it print 1mm of…
P
Printables
DIN mount for 6x CNC Controller for FluidNC
This model has 2 parts, a Backplane which uses M3 heated threaded inserts to fasten the 6x CNC Controller for FluidNC, and a latch which slides into the bottom of the Backplane, locking the Backplane to the DIN Rail. Optional ‘spacers’…
P
Printables
Difluid R2 Case
I was looking for a case design and could not find one. Additionally I wanted to make sure it was padded so that the R2 would not be shaking about the case. You will need 3x6mm foam tape to ensure that it fits perfectly. According to how…
P
Printables
Syringe "squeezer" to filter viscous fluids
This tool is a squeezer i use to force a viscous fluid through a syringe filter. In the off chance that like me, you need to filter a syrup like fluid through a syringe filter, you will find it much easier to do with this than by hand...…
P
Printables
Fluid Cup V2
ATTENTION the cup wont fit the fluid without changes! Please hit "like" if you download it. Use a "horizontal expansion of -0.2 mm" in cura for the cup. The walls of the cup will get thinner and the cup fits into the groove it made into…
P
Printables
Fluid Cup V1
I did a fluid simulation in blender and printed it :-D A friendly person asked me if I could seperate the models for printing in different colors. Of course I can. But because the object will fall over very easy, I also made a V2 with a…
P
Printables
Mazda 2 (DY) Windshild wiper fluid cap / Wischwasserbehälterdeckel
… the strap you can fix with a ties
P
Printables
FluidDial Pendant CRADLE v2.2 - for LowRider v4 (attaches to YZ plate on X-min side)
Heads-up: There's a new version of this: v2.3 — The only change in that remix was to make a bidirectional version of the cradle. Works no matter which side of the gantry you attach it. — Get it here:…
P
Printables
HotCoat PCS-250 Fluidizer
HotCoat PCS-250 Fluidizer Goes on the end of the long tube inside the powder bottle. This will help mix the air and powder to create a more homogenous mix leading to easy/better coverage.
P
Printables
Honda SCL500 CB500X CB500F Rear Brake Fluid Reservoir Cover
Sized to fit Honda SCL500 but should fit other bikes that use same rear brake fluid reservoir. Support material required for the window. Doesn't use much and this should be a quick print. I don't think you need consider ASA. You can use…
P
Printables
Windshield washer fluid funnel for VW / Audi / Skoda / Seat
Introduction Refilling windshield washer fluid can sometimes be a mess, but not anymore! This funnel is designed to be used when refilling windshield washer fluid with minimum waste of washer fluid. Features Handle: This funnel has a…
P
Printables
Antisplash funnel for washer fluid
Antisplash funnel for washer fluid - 44.5mm OD for the reservoar side. fits perfectly to the 45mm hole on reservoar on my bmw e83. was thinking about adding air hole but with this hole diameter its not needed at all.
P
Printables
Trichter für Wischwasser Ford Focus Modell 2021/ Funnel for wiper fluid Ford Focus model 2021
Es handelt sich um einen Trichter für das Scheibenwischwasser des Ford Focus Modell 2021. Der Trichter hat einen unteren Durchmesser von 46 mm und einen oberen Durchmesser von 125 mm. Die Höhe beträgt 155mm über der Einfüllöffnung, so…
P
Printables
6901 Bearing Extractor & Receiver for the Norco Fluid and others
This is a custom bearing extractor and bearing receiver for 8 of the 12 bearings used in a Norco Fluid rear suspension. The other 4 bearings will require you punch them out or use a sliding hammer bearing puller sadly. Additionally, the…
P
Printables
Washer fluid cap
Simple cap forI recommend printing from TPU, but printing from ABS also worked for me, but the lid is harder to put on. washer fluid container. Standard size for common containers
P
Printables
Encoder Wheel Pendant for the LR4 with FluidNC
This are Housing and Mount files for my version of the CYD Dial Pendant for the Lowrider V4 From V1 Engeneering https://www.printables.com/model/1034840-lowrider-4-cnc in compination with the Jackpot controller running FluidNC. I used…
P
Printables
Ford Focus 2012 Windshield Washer Fluid Reservoir Cap
I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…
P
Printables
BMW i3 washer fluid funnel
Can be printed ‘as is’ (large side facing upwards) with no supports, brim enabled. Diameter (smaller end) is 48mm.
P
Printables
FluidNC 4 axis foam cutter controller
Why not building a brand new foam cutter controller with the following requirements : able to drive a hot wire equiped with 4 bipolar steppers driven by standard polulu shields and with an ESP32 MCU FluidNC driven able to "eat" gcode…
P
Printables
Fluid Distribution Cap - 1.5 (1-1/2) inch PVC
Fluid Distribution Cap for Hydroponic Agriculture applications or a Microgreen Machine. Distributes water to up to 8 ways. It is designed to work with 1.5" (1 ½") PVC pipe threads, and 0.25" (¼") standard rubber irrigation hoses.
P
Printables
Tube Mounted Clutch Fluid Reservoir
I made tube mounted brake fluid reservoir for my Monster Truck and it have two main brake cylinders so i made one with 4 hoses in PA12- CF. It fits the big hated half twist of attached lid on pet bottles the 40mm ones if you can't find it…
P
Printables
Tube Mounted Brake Fluid Reservoir 2
I made tube mounted brake fluid reservoir for my Monster Truck and it have two main/master brake cylinders so i made one with 4 hoses in PA12- CF. It fits the big hated half twist of attached lid on pet bottles the 40mm ones if you can't…
P
Printables
Tube Mounted Clutch and Brake Fluid Reservoir
I made tube mounted brake fluid reservoir for my Monster Truck and it have two main/master brake cylinders so i made one with 4 hoses in PA12- CF. It fits the big hated half twist of attached lid on pet bottles the 40mm ones if you can't…
P
Printables
Tube Mounted Brake Fluid Reservoir 4
I made tube mounted brake fluid reservoir for my Monster Truck and it have two main/master brake cylinders so i made one with 4 hoses in PA12- CF. It fits the big hated half twist of attached lid on pet bottles the 40mm ones if you can't…
P
Printables
Lid for Tube Mounted Clutch and Brake Fluid Reservoir
I made tube mounted brake fluid reservoir for my Monster Truck and it have two main brake cylinders so i made one with 4 hoses in PA12- CF. It fits the big hated half twist of attached lid on pet bottles the 40mm ones if you can't find it…
P
Printables
Custom "Grippy" Fluid Dial Pendant Cases (RJ12 connection version)
I remixed Bart Dring's RJ12 case for the Fluid Dial Pendant which uses and connects to Fluidnc controllers using this RJ12 kit . I added grippy textures to improve handling and aesthetics. I have included the .step files for you to…
P
Printables
Vented funnel for windshield fluid
This is my updated version of the windshiel fluid funnel, modified for those who are dealing with a tighter fit.
P
Printables
funnel for ford focus 2 (windshield washer fluid)
funnel for ford focus 2 (windshield washer fluid) or other with hole bigger than 32mm. Printed with PLA (use brim, no supports)
P
Printables
Windshield washer fluid funnel - Skoda
can be left next to car battery for everyday use. it fits in my octavia 3 Brim is nessesary!
P
Printables
GL45 Bottle cap with 1/4-28 fluidic port
Print with the top of the cap upwards. should not require support. after printing, use a ¼-28 UNF bottoming tap to cut the threads in the port.
P
Printables
Controleur FluidNC V2
On a réalisé sur la chaine un controleur FluidNC compatible avec des CNC type Genmitsu PROVerXL 4030, les steppers étant internes. Cette version propose la même chose mais sur une CNC avec les steppers intégrés sur les moteurs. Nous…
P
Printables
Lejek do płynu od spryskiwaczy (pasuje do Orlen i inne) - średnica 29 mm, Windshield washer fluid funnel
Lejek do płynu od spryskiwaczy (pasuje do Orlen i inne) - średnica 29 mm, Windshield washer fluid funnel, Nálevka kapaliny ostřikovače čelního skla Moje ustawienia wydruku: Materiał PLA, warstwa 0,3 mm, wypełnienie 15% lub więcej, podpory…
P
Printables
Plate for "Fluid Dial" CNC pendant (Doug Joseph) - AMS-Print
I like Doug Joseph's (design8studio) design for the Fluid-Dial (handwheel for FluidNC). However, it is very easy to print in multiple colors on a printer with AMS, you don't need individual logo plates. The original and all other parts…
P
Printables
FluidNC Pendant CYD Display
The case design for CYD (ESP32 Cheap Yellow Display) running FluidDial FW. This is use EC11 Rotary Encoder instead of MGP CNC Handwheel like the original. And add two physical buttons in combination with encoder button. Power and UART…
P
Printables
Windshield washer fluid funnel - Skoda with hole
For better strength and watertightness, use the following settings: Walls: 3 Layer height: 0.3mm Line width: 1mm (0.8mm should work for most hotends if 1mm is too much) Wall generator: Classic (Arachne doesn’t work well with this model)…
P
Printables
Funnel for refilling washer fluid (trychtýř pro doplňování kapaliny do ostřikovačů)
Without supports!!! For Skoda, WV, citroen…
P
Printables
Citroen C4 Wiper Washer Fluid Cap
This is a threaded cap for the wiper washer fluid tank of a citroen C4, it consists of two pieces. The first piece fits by preasure and the second one screws to the first one acting as a cap. I'm not sure if it can fit other citroen…
P
Printables
Seat Winshield Washer Fluid Funnel
The washer fluid continer in my car (2014 Seat Ibiza ST) is in the top right corner of the engine bay. I was looking for a helping funnel and got inspired by the design of Christian K. I designed from scratch but got some measurements and…
P
Printables
Skoda Octavia (2018) windshield fluid cap
Print with TPU !!!! If you lost your fluid cap just print it :)
P
Printables
Reef Fluidized Reactor
Fluidized Bed Reactor, or simply a fluidized bed for use in media contact in reef aquarium system. I will be using it for contacting with Iron Oxide Hydroxide for phosphate removal but it could be used to contact with any other type of…
P
Printables
FluidNC CYD pendant case - JC2432W328C (capacitive touch)
I generated the STLs that correspond to the different cases: Bottom : WIthout RJ12 port : CYD_Dial_JC2432W328C_bottom_without_RJ12.stl RJ12 on rounded side : CYD_Dial_JC2432W328C_bottom_RJ12_rounded_side.stl RJ12 on squared side :…
P
Printables
Case for the slim fluidnc dial
I made a case for the github case that is thinner than these but i noticed when i was comparing the files.
P
Printables
Fluid Cup V2
ATTENTION the cup wont fit the fluid without changes! Please hit "like" if you download it. Use a "horizontal expansion of -0.2 mm" in cura for the cup. The walls of the cup will get thinner and the cup fits into the groove it made into…
P
Printables
Fluid Cup V1
I did a fluid simulation in blender and printed it :-D A friendly person asked me if I could seperate the models for printing in different colors. Of course I can. But because the object will fall over very easy, I also made a V2 with a…
P
Printables
FluidDial Pendant CRADLE v2.3 (bidirectional)- for LowRider v4 (attaches to YZ plate on either X-min side or X-max side)
The only change in this remix was to make a bidirectional version of the cradle. Works no matter which side of the gantry you attach it. Major kudos to Ryan of V1 Engineering for releasing the LowRider v4 CNC ! This FluidDial CRADLE v2.3…
P
Printables
FluidNC CYD Dial Pendant Holder
Just a very simple mod of the original CYD Dial Pendant Holder by @Guillaumenico for his FluidNC CYD pendant case . CYD Dial Pendant Wiki V2 Has been added - it has thicker walls at 3.5mm and lots more chamfers. CAD file has been included.
P
Printables
FluidNC 6X CNC embedded ESP32 controller case
A Bart Dring 6X CNC controller case design I made for my own use. For ease of swapping out the controller, I built the wiring around a 26pin “aviation” connector to be able to just take out one controller box and insert another without…
P
Printables
BMW i4 washer fluid funnel
Can be printed ‘as is’ (large side facing upwards) with no supports, brim enabled. Diameter (smaller end) is 40mm.
P
Printables
Washer fluid cap for 2015 Cadillac ATS
Washer/Wiper fluid cap for 2015 Cadillac ATS. I printed mine at 0.3mm layer height. Supports used for inside rim of cap, but blocked supports for the bottom emblem. You will need to use a heat resistant filament (NOT PLA). I used PETG,…
P
Printables
Thrumeter Stand - Thermometer for flowing fluid
Primarily used in the brewing process when flowing the boiled vort through the chiller and into its fermenting vessle.
P
Printables
Tesla Model 3 and Model Y Windshield Wiper Fluid Cap with flap
Cap for tesla model3 windshield fluid tank.
P
Printables
Peristaltic pump - nominal diameter Ø8mm - for fluids like cooling water, water, engine oil and other similar
All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…
P
Printables
Plumbers are Fluid Mechanics sign
100x160mm sign. celebrating the ingenuity of plumbers. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the Shadowbox…
P
Printables
Windshield Washer Fluid Cap
Windshield Washer Fluid Cap - With and without print-in-place hinged lanyard. Example in photo was printed using PETG 100% infill without support or brim to fit 1998 Nissan Frontier. (2.25 inch)
P
Printables
Car / Windshield fluid funnel - 38mm tube
Windshield funnel made for my 2021 - model 3, wanted something way easier to pour into. the OD of the base of the shaft is 38mm and the funnel max diameter is 125mm I recommend printing in petg funnel down on the build plate with no…
P
Printables
VW Tiguan Washer Fluid Cap Plug / Cap VW Part Number 3Q0955455
This is a temporary replacement cap / plug For 2018 Volkswagen Tiguan (May fit others models even Porsche!) Washer Fluid
P
Printables
Brake fluid reservoir cover
Kann ohne weiteres Zubehör montiert werden, Originalschraube ist lang genug.
P
Printables
OPEL Astra J washer fluid reservoir cap 13227300
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.
P
Printables
Refill Spout for Car Washer Fluid
Simple funnel/canister-spout. Fits refill washer fluid canister with 33.5mm inner diameter cap opening. Does not screw on, just insert and hold it against the opening. Update 2026 March 29: I have uploaded a new improved version of this…
P
Printables
RAV4 washer fluid filling neck
The washer fluid bottle on a 1st gen rav4 is remotely located in the front fender and connected to a filling neck by a tube. In my case the bottle and tube are fine but the fill neck is brittle and crumbling. This is a discontinued part…
P
Printables
1993-2002 Corolla/Geo/Chevrolet Prism Washer Fluid Cap
3D-Printed Replacement Windshield Washer Fluid Cap for 1993-2002 Toyota Corolla & Geo/Chevrolet Prizm Keep your vehicle’s washer fluid system secure with this 3D-printed replacement windshield washer fluid cap , designed to fit all…
P
Printables
DIN mount for 6x CNC Controller for FluidNC
This model has 3 parts, a Backplane which uses M3 heatset threaded inserts to fasten the 6x CNC Controller for FluidNC, and two tensioned DIN Rail mounts . The Backplane spans the entire board and the lip for the top rail, making it more…
P
Printables
Brembo Brake Fluid Reservoir
After attempting to install Brembo Brake Fluid Reservoir on my motorcycle, I just couldn't get the pot to fit without interfering with other parts. I then decided to get a generic bracket from amazon and make the anti-vibration mount from…
P
Printables
Paint & fluids holder for airbrush and modelling: Wall and ceiling mounted
I designed these paint holders to store my paints on the pitched ceiling of my shed, but they'll work on a vertical wall too. They could be stuck to a wall, but they have countersunk screw holes for easy fixing. Covering most sizes of…
P
Printables
DIN mount for 4x CNC Controller for FluidNC
This model has 3 parts, a Backplane which uses M3 heatset threaded inserts to fasten the 4x CNC Controller for FluidNC, and two tensioned DIN Rail mounts . The Backplane spans the entire board and the lip for the top rail, making it more…
P
Printables
Mitsubishi Pajero/Montero/Shogun brake fluid reservoir cap
This is a temporary replacement cap for the brake fluid reservoir on a Mitsubishi Pajero 4th generation (Montero/Shogun). I suspect this would work for other Mitsubishi cars. I have made this out of ASA, however I believe that brake fluid…
P
Printables
![[frugal and open fluidic microscope] La lorgnette des micromondes](https://media.printables.com/media/prints/81108af7-67df-471c-ab0b-15dd6ea9b122/images/10645194_c374b687-5a6f-4583-87f8-84f99adab8e5_0b8004db-79fc-466f-a15e-26fd9f1a8de5/img_20250909_182852.jpg)
[frugal and open fluidic microscope] La lorgnette des micromondes
English 🇬🇧 : “Fluidic and Manual Plankton Microscope” Warning! This documentation may not be up to date. The link to the official documentation is below. An open, 3D-printable field station designed to explore the invisible worlds…
P
Printables
Wiper Fluid Lid Piaggio Porter S85 / Daihatsu Hijet
Sparepart for Piaggio Porter S85 /Daihatsu Hijet. I recommend printing this in TPU @ 100% infill. No support required
P
Printables
Replacement tube for Fluid Dispenser
The original tube broke, so I made a thick replacement tube out of TPU for my fluid dispenser. Inner diameter of the tube is 5.25mm. This is the fluid dispenser I use - https://www.aliexpress.com/item/1005006090350960.html Print Settings:…
P
Printables
POWDER COAT PNEUMATIC FLUIDIZER
Pnuematic powder coat fluidizer bed. This device injects air into the chamber to aerate the powder coat powder. You will need an ¼"NPT hose barb A small aquarium air pump. Section of aquarium airline. A coffee filter or other filter…
P
Printables
Flexible Car Washer Fluid Funnel (ABS/PET-G, Vase Mode Optional)
This is a sturdy and flexible funnel for pouring washer fluid into your car’s reservoir. It can be printed in standard mode for maximum strength, or in vase mode if you want to save time and filament. For vase mode, just be sure to set at…
P
Printables
Subaru Brake Fluid Cap Gasket
My Subaru Forester's brake fluid reservoir gasket had a hole in it. I mocked up a simple copy in Fusion360 for a TPU replacement. I printed mine in Overature 95A TPU @ 230C with 35C bed with surface ironing on and detect thin edges on.
P
Printables
Washer fluid lid
Washer fluid lid for cars, 55mm diameter, Peugeot Partner, Citroen Berlingo and other models. The lid keeps the washer fluid safe for dirt if you are missing the original lid. Designed to fit direct on filler-neck. Fits well, a bit hard…
P
Printables
Xsara Picasso / cap for windscreen washer fluid tank
I've lost the windscreen washer fluid reservoir cap on my Xsara Picasso. Here's a replacement, to be printed in flex filament (eg TPU98)
P
Printables
Organic Watering Can - Fluid Form, Exceptional Functionality!
Introducing the "Organic Watering Can" – an innovative watering can that harmoniously blends nature with modern design. Its unique, fluid lines and organic shapes draw inspiration from the natural world, creating an object that is both…
P
Printables
The Substance - Activator Fluid 2D Keychain
The Substance - Activator Fluid 2D Keychain This model was a request from a friend of mine who had just watched the movie The Substance. As you can see, I did not have the correct green color to correctly emulate the actual Activator…
P
Printables
Solo Cup Fluid Content Measurement Tool
Disposable measuring cups for mixing epoxy resin, paints, stains or other solutions are not cheap. Solo cups are cheap, but they lack the graduated markings for consistency. This device solves that problem.
P
Printables
Washerfluid cap with embedded logo
Nice model and remix by Frikkie ( https://www.printables.com/model/580969-washerfluid-cap-remix ) but supports can be rough on a surface so i made one with embedded logo to print without supports. I recommend priting it upside down to…
P
Printables
Windshield Washer Fluid Reservoir Cap / Deckel für Wischwasserbehälter
This is an improvement of my windshield washer lid https://www.printables.com/model/839835-peugeot-traveller-screen-wash-lid-deckel-fur-wisch. This one has a retaining strap and can be printed with 2 colours.
P
Printables
Parametric Hydraulic Fluid Tank Breather Cap
The plug/cap for my father-in-law's RV hydraulic fluid tank broke and getting a replacement was going to take weeks (it was also kinda expensive at like ~$50 shipped). I made this replacement for him and it has been working well in that…
P
Printables
Yamaha XS 650 Trichter funnel Bremsflüssigkeit brake fluid
Trichter um an der Yamaha XS 650 die Bremsflüssigkeit in den Behälter für die hintere Bremse einzufüllen. Massiv gedruckt mit fünf oder sechs Perimeter, auf die große Öffnung gestellt ohne Stützmaterial. Probedrucke wurden mit PLA und…