Lighter fluid flame race tracks - fun with fire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These models allow you to create race tracks for flames with the help of lighter fluid. See video below.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 189
- Wydruki
- 4
- Wyświetlenia
- 1172
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
ATTENTION This is a super fun teaching toy, but you are literally playing with fire. My first print burned to a sludge because I had too much gasoline in it. But I did it on a large non-flammable surface and had water and fire extinguisher nearby. No problem in my case, I just let the gasoline burn itself out and then blew out the burning PETG. Ideally do it outdoors and have sand, a blanket, a fire extinguisher, or similar at hand! ATTENTION
Steve Mould made a video about lighter fluid flames racing along a flame race track:
I was looking for the STLs and the parametric Fusion360 files on Printables, but could not find them. This is a reupload respecting the original license: CC BY 4.0 OscarMorris-Design
ATTENTION This is a super fun teaching toy, but you are literally playing with fire. My first print burned to a sludge because I had too much gasoline in it. But I did it on a large non-flammable surface and had water and fire extinguisher nearby. No problem in my case, I just let the gasoline burn itself out and then blew out the burning PETG. Ideally do it outdoors and have sand, a blanket, a fire extinguisher, or similar at hand! ATTENTION