Lighter fluid flame race tracks - fun with fire
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These models allow you to create race tracks for flames with the help of lighter fluid. See video below.
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 189
- Makes
- 4
- Views
- 1,172
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
ATTENTION This is a super fun teaching toy, but you are literally playing with fire. My first print burned to a sludge because I had too much gasoline in it. But I did it on a large non-flammable surface and had water and fire extinguisher nearby. No problem in my case, I just let the gasoline burn itself out and then blew out the burning PETG. Ideally do it outdoors and have sand, a blanket, a fire extinguisher, or similar at hand! ATTENTION
Steve Mould made a video about lighter fluid flames racing along a flame race track:
I was looking for the STLs and the parametric Fusion360 files on Printables, but could not find them. This is a reupload respecting the original license: CC BY 4.0 OscarMorris-Design
ATTENTION This is a super fun teaching toy, but you are literally playing with fire. My first print burned to a sludge because I had too much gasoline in it. But I did it on a large non-flammable surface and had water and fire extinguisher nearby. No problem in my case, I just let the gasoline burn itself out and then blew out the burning PETG. Ideally do it outdoors and have sand, a blanket, a fire extinguisher, or similar at hand! ATTENTION