1 / 3
F-16 Fighting Falcon Build Kit Card - 1:288 Scale — zdjęcie 1
1 / 3

F-16 Fighting Falcon Build Kit Card - 1:288 Scale

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

F-16 Fighting Falcon kit card in 1:288 scale. Prints on a single plate, snaps together.

Ocena
0 / 5
Polubienia
9
Pobrania
80
Wydruki
0
Wyświetlenia
230
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Share Alike

My interpretation of the F-16 Fighting Falcon in 1:288 scale as a kit card.

All parts print on a single plate and snap together. Depending on your printer's calibration, you might need to adjust tolerances slightly. If parts are too tight or loose, try adjusting the z-scale up or down without changing x & y - this usually helps.

Print tips:

  • Brim is recommended for better bed adhesion on the thinner wing sections

  • Print settings are flexible - use what works best for your setup

Follow the included assembly instructions for best results.

Tagi