1 / 8
Adjustable Heavy-Duty Leveling Foot – M40×3 (90–120 mm) — zdjęcie 1
1 / 8

Adjustable Heavy-Duty Leveling Foot – M40×3 (90–120 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adjustable leveling foot designed for high-load applications, featuring an M40×4 thread.

Ocena
0 / 5
Polubienia
12
Pobrania
61
Wydruki
0
Wyświetlenia
194
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This adjustable leveling foot is designed for high-load, structural and heawy applications where precise height adjustment and stable load transfer are required.
The component features a large-diameter M40×3 threaded body, reinforced side walls, and a wide base optimized for load distribution.

The upper mounting flange (8mm holes) allows rigid attachment to frames or machine bases, while the threaded section enables fine vertical adjustment. The lower foot geometry is suitable for use with a rubber pad or damping element to reduce vibration and surface damage.


Printing Recommendations

  • Material: PETG / ABS / PA (nylon)

  • Wall thickness: minimum 4–5 perimeters

  • Infill: 40–60% (gyroid or cubic)

  • Slower print speed recommended to ensure thread accuracy


PLA is suitable for low static loads. It is not recommended for dynamic or continuous load applications.

Tagi