Jumping Robot Mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Check out the second versionhttps://youtu.be/RuMLHJW1teMhttps://www.thingiverse.com/thing:4976714 I am building…
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 2268
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Check out the second version https://youtu.be/RuMLHJW1teM https://www.thingiverse.com/thing:4976714
I am building jumping robot and this is first version of the main mechanism.It works by compressing 2 springs and later relasing them with great strength.There are 5 gears that together ensure high torque required for the pinion to move rack.
Part List
Some 3mm screws
3mm shaft(2x 25mm and 2x 65mm 2x100mm)
N20 motor (In my case it was 60:1)
2 Springs(I removed them from the shock absorbers of the toy monster truck) Wire diameter:1.20mm Outer Diameter:18mm Length:68mm
Youtube video https://youtu.be/Wg9lfUfxd3s
I don't know why but there seems to be 500kb picture limit so you can find high quality photos here https://cults3d.com/en/3d-model/gadget/jumping-robot-mechanism
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.3
Infill:
40
Category: Robotics