MSM Vesa 100 Skadis Mount

1. What is MSM (Modular Slicing Model)?

MSM means the model is provided as a 3MF so you can apply different slicer settings to different parts of the same print. The 3MF contains multiple models while keeping the relative location. This allows the different parts to have different slicer settings but still being printed as one.

I started to use this for some of my private projects as well as some for Uni. But I never seen anyone else utilize this feature. IMO it can greatly increase structure, stability, save filament and can be use for decorative things as well. 

2. How to use MSM in PrusaSlicer!

When the file is open in PrusaSlicer the following will appear:

YOU HAVE TO CHOOSE YES OR ELSE IT ILL NOT WORK!!!

After successfully loading the file please check if the order is correct.

The next step: You can choose how you want to change the parts. Just select the part and right click. The setting are at the bottom. You can change:

• The infill typ or %

• The numbers of shells, top or bottom solid layers

• Fuzzy skin

• The Speed

• Ironing Settings

3. What can this model do? + recommend settings

This model contains 6 parts.

1. The Main_Body --> This holds everything together. Should be change via the settings in the "Print Settings" tab. 3 Shells recommend, 15-20% gyroid infill

2. 3 Hooks --> The hooks ge beneath the surface and have a anchor like body to give additional hold. These are to hook in the Skadis. Set infill to 100%

3. 2 Zylinder --> These zylinder act as structual support for the screws. When tightening the screws too much the print could break from the enormous forces. They eliminate hollow parts beneath and greatly reduce the risk of breaking the part. Set infill to 100%

I used PolyMaker PETG CF08 for this. 

This Model is made for M4 screws and has a version for flat and Countersunk screws.