Royal "flatbed" (1/5/6) typewriter rubber foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement rubber foot for a Royal "flatbed" (1/5/6) typewriter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement rubber foot for a Royal "flatbed" typewriter. It should work for the Royal 1/Royal Standard, Royal 5, and Royal 6.
Print settings:
I used Siraya Tech Flex TPU - 85A Filament
Shore 95A TPU is too hard.
Softer TPU should work as well, but I haven't tried.
85A gives decent grip on a smooth surface.
I fed the TPU directly to the extruder, no PTFE tubing.
This design is based on original Royal "flatbed" feet. I checked my 1910 Royal 1/Standard, my Royal 5, and my Royal 6. The feet are cylindrical and have a notch for the screw. Some feet have a thick metal washer on top. For my Royal 1, the feet are short, while on the 6, they are taller. I provide two STL files with different heights.
The model is parametric so you can adjust the diameter and height of the foot.