Royal "flatbed" (1/5/6) typewriter rubber foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement rubber foot for a Royal "flatbed" (1/5/6) typewriter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
This is a replacement rubber foot for a Royal "flatbed" typewriter. It should work for the Royal 1/Royal Standard, Royal 5, and Royal 6.
Print settings:
I used Siraya Tech Flex TPU - 85A Filament
Shore 95A TPU is too hard.
Softer TPU should work as well, but I haven't tried.
85A gives decent grip on a smooth surface.
I fed the TPU directly to the extruder, no PTFE tubing.
This design is based on original Royal "flatbed" feet. I checked my 1910 Royal 1/Standard, my Royal 5, and my Royal 6. The feet are cylindrical and have a notch for the screw. Some feet have a thick metal washer on top. For my Royal 1, the feet are short, while on the 6, they are taller. I provide two STL files with different heights.
The model is parametric so you can adjust the diameter and height of the foot.