Uline Sticky Note Pallet Scale Forklift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This forklift is scaled so that it can hold sticky note pallets from Uline
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 581
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This forklift is scaled so that it can hold sticky note pallets from Uline. Not modeled after any particular forklift but a combination of pictures found online and the forklift at work.
Print 2x of the following files:
Forklift_Cabin_Side.stl
Forklift_Front_Wheel.stl
Forklift_Rear_Wheel.stl
Forklift_Fork.stl
The following files will need to be printed with supports enabled:
Forklift_Body.stl
Forklift_Load_Backrest.stl
Forklift_Cabin_Top.stl
For counterweight I used two lengths of 7/8" brass round stock about 2" long. Any heavy object should work such as steel.
For wheel axles you will need 4x 10-24 1.5" bolts. It should be an interference fit in the body so either use the bolt to form the threads or use a tap. If you can only get metric bolts a M5 may work but I have not tried it.
I have added a pallet if you want to print one or your sticky notes did not come on a pallet. I have not printed it so I am not sure how well it will turn out.
FreeCAD design files are included if you need to modify anything. Be sure to share your modifications with everyone on Printables!
I had originally uploaded this to Thingiverse as thing:3165641 and never got around to importing it here to Printables.