Uline Sticky Note Pallet Scale Forklift
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This forklift is scaled so that it can hold sticky note pallets from Uline
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 97
- Makes
- 0
- Views
- 581
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
This forklift is scaled so that it can hold sticky note pallets from Uline. Not modeled after any particular forklift but a combination of pictures found online and the forklift at work.
Print 2x of the following files:
Forklift_Cabin_Side.stl
Forklift_Front_Wheel.stl
Forklift_Rear_Wheel.stl
Forklift_Fork.stl
The following files will need to be printed with supports enabled:
Forklift_Body.stl
Forklift_Load_Backrest.stl
Forklift_Cabin_Top.stl
For counterweight I used two lengths of 7/8" brass round stock about 2" long. Any heavy object should work such as steel.
For wheel axles you will need 4x 10-24 1.5" bolts. It should be an interference fit in the body so either use the bolt to form the threads or use a tap. If you can only get metric bolts a M5 may work but I have not tried it.
I have added a pallet if you want to print one or your sticky notes did not come on a pallet. I have not printed it so I am not sure how well it will turn out.
FreeCAD design files are included if you need to modify anything. Be sure to share your modifications with everyone on Printables!
I had originally uploaded this to Thingiverse as thing:3165641 and never got around to importing it here to Printables.