Extended S1/S1 pro light bar Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make room for your Taurus V5 cooling duct/fans!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I modified the stock light bar arms for my S1 to make sure my TaurusV5 had enough Z clearance. IMO using a longer version of the stock arms comes in handy vs other alternatives, and keeps that clean stock look. Also came in handy after installing my z axis linear kit (which you'll have to make sure to use 8mm M5 screws for mounting as the kit mounts from the top of the gantry). You will need to extend the wire from the switch just a bit because these are super long, about an additional 40mm in clearance.
I recommend at least 30% infill.
Printed great on the K2 Plus