1 / 5
Suzuki Grand Vitara Running Light Cover (2014-2018 Models) — zdjęcie 1
1 / 5

Suzuki Grand Vitara Running Light Cover (2014-2018 Models)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement running light cover for Grand Vitara models from 2014 to 2018

Ocena
0 / 5
Polubienia
9
Pobrania
47
Wydruki
0
Wyświetlenia
428
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

***Disclaimer: i made the part as close to the original as i could but i can't guarantee correct fitment, so results will vary. my friend's vitara had some of its flanges bent, and while it fitted fine, it fell off after a week and cant test the model further. so any feedback on fitment would be very much appreciated and will be used to improve the design further if needed. You can share feedback in the comments or via private message.

This is a replacement running light cover for the Suzuki Grand Vitara, model years 2014 to 2018. If yours is missing (and most likely it is, like I’m genuinely impressed by how many Vitaras I’ve seen with missing covers), then you are in the right place.

A .3MF file is provided with the correct orientation and required supports. I used 2 perimeters, a 0.2 mm layer height, and 10% gyroid infill. It is recommended to use a filament with high ductility and toughness, such as Nylon 12 or PP. ASA can work as well. PETG is the bare minimum

Tagi