Carrera 132 Porsche 935/78 Rear Spoiler / Wing / Heckspoiler 1:32 Slotcar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rear wing (spoiler) for the Carrera 132 (evolution or digital) Porsche 935/78 "Martini Racing" Slotcar
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heckspoiler für Carrera Porsche 935/78 (hier "Martini Racing),
im Maßstab 1:32
Nach dem Drucken ist etwas Schleifen mit feinem Sandpapier auf der Rückseite notwendig, wo die Stützen befestigt waren.
Ich habe die *.f3d Datei aus Fusion360 mit angehängt, falls man selbst noch Änderungen vornehmen möchte oder den Maßstab ändern muss.
*******************************************************************
Rear wing for Carrera Porsche 935/78 ("Martini Racing"),
Scale 1:32
After printing, some grinding with fine sandpaper is necessary on the back where the supports were attached.
I also attached the *.f3d file (Fusion360) in case you need some own modifications or you want to Change the scale.
*****************************************************************
Print Settings / Druckeinstellungen:
Material PLA or TPU
100% Infill
0,1mm Layer (or less)
Brim / Raft (for adhesion)
Supports on!