Liczymy pasujące modele…
You can find full instructions for slicing, printing, and casting here . In addition to the setup detailed at that link, for this model I recommend maximum support overhang of 45° in order to adequately support the mold. The image shows…
You can find full instructions for slicing, printing, and casting here . In addition to the setup detailed at that link, for this model I recommend maximum support overhang of 60° in order to adequately support the mold. The image shows…
In the new GONG back wing / stabilizer system, you can adjust the back wing/stabilizer’s angle of attack using a shim. Here we have two shims: one for 0 degrees – which is needed if you want to ride without any adjusted angle of attack –…
Gland coupling with double orings. 100%waterproof. The model is parameteric in fusion so you can use whatever oring you have. Designed with the help of Parker O-ring handbook. To assure waterproofness you need tho file/sand down the seam…
intro A box with a cutter for easy access for kitchen foil (Frischhaltefolie) The cutter needs to be 33cm x 9mm. Available at Amazon (DICOSMETIC 6 Stück Plastikfolienschneider 13 Zoll). Print settings: 25% infill PLA organic support glue…
Note: I made an updated version of this pod that uses zip ties to secure it. There is much less play in it, I recommend using that new model: ____________________________________________________________________________________ This is a…
**Updated model again - I updated the model so the mount is shorter (less swing weight), main change is I inverted the dove tail. * Updated mode l - The file title with "update" has a small change where I rounded off the leading edge of…
a knot inspired by Robert Fathauer Category: Math Art
a vertically oriented 5-crossing knot Category: Math Art
a knot inspired by artist Robert Fathauer Category: Math
What is Foiled The goal behind this project is to have a cheap and accessible physical signal blocker for everyone that is: Simple to construct, Robust enough to be used multiple times and thrown in a bag or backpack Quick and easy to…
AK Integrated Foil Drive Mast to Flipsky 6384 Motor Puck. STL and Step file included. Printed on Creality K1C with PTEG-cf. I adjusted size to get a super snug fit in the mast.
A simple trefoil knot inspired by BM Stewart and their book Adventures among the Toroids. Designed with cubes and hexagonal prisms then scale to minimize materials.
Jeder der Foilt kennt das gefummel mit den Nutensteinen. Mit der Platte ist das nicht mehr notwendig. Die Nutensteine werden einmal eingeklickt und sind jetzt immer an der richtigen Position um den Foil festzuschrauben. Sie können auch…
Update: Doing post processing is very much worth it! A good printer, spray filler and a top coat, sanded to a 1500 grit finish creates a mirror finish. This is probably the easiest/fastest way to make a stabilizer since it only needs a…
Organize your kitchen with ease! This is a practical and sturdy holder designed to mount your kitchen rolls directly onto furniture, shelves, or under cabinets. Whether it's aluminum foil, plastic wrap (cling film), or baking paper ,…
Silhouette Heated Foil Embosser Box This is a custom-fitted storage box for a set of Silhouette Heated Foil Embossers. https://www.amazon.com/Silhouette-Heat-Set-Foil-Transfer/dp/B0CLF73YLT/ If you're a Silhouette-equipped crafter or are…
Optimized replacement for smooth unrolling This is a custom-made replacement insert for common kitchen foil or plastic wrap dispensers (especially the magnetic, refillable models with an integrated cutter). The original insert of many…
Eppler 387 Airfoil format with 250mm chord length and 15mm spar mount,
A compact set of 3D-printed lab tools designed to block light and make everyday lab work more comfortable and efficient. The set includes a stable holder for 50ml and 15ml tubes, a reusable light-blocking cover, and a 96-well plate holder…
3d-print your own hydrofoil wings and save hunderes of dollars $$$ I recommend using a big nozzle. A .2mm or .6mm layer height won't affect the finish. When it's covered by fiberglass. Don’t use more than 10% infill. The 3d printed core…
Smaller than commercial mounts for compactness but still big enough that the dial/body doesn't extend over the edges. The legs extend only to the edge of the lock body to make it easier to pack multiple against each other. Uses standard…
Just a storage for 4 rolls of whatever you choose. 1 compartment is bigger for the large Clingfilm device. My wife's idea - she wanted to free up some space inside the cupboard itself.
This is an easy storage solution for your kitchen. It fits the baking paper, aluminum foil and plastic wrap in 3 different slots. Spacing between hexagons are sized for alien tape or command strips.
I designed this US box track tool which is used as a guide to trim masking tape when building a DIY hydrofoil board. If you find this useful and would like to show your support, please buy me a coffee :)…
This is an airfoil of the Rc Timber that has holes in it to Styrofoam cut it.
Efoil flange adapter (boardside part) with a groove for instalation of a sealing oring 3 mm diamenter
These TPU retention sliders hold hydrofoil T nuts in your desired position between sessions. They speed up assembly and disassembly before and after foiling sessions. They are easy to install, and slide to reposition with a hex or torx…
The cutter got extra blade to cut more easily. Size: 75x75mm
I've been on an organizing kick lately in my kitchen, and I ran across an under-shelf cling-wrap box holder. But, I didn't much care for it. It printed tall--very tall-- so it takes a bit longer, since printing along the z-axis is slower…
This is a wingfoiling harnes hook I made. After testing different designs, this is a good strong design. It's easy to print. Settings, you can use PETG, which is strong and watter proof. (4 layers and 80% infill is a good idea).…
This model will make a super strong FORGED CARBON Wingfoil Harness HOOK. There are 3 parts, 2 for the base, 1 for the piston. Please following this youtube video from Easy Composites. Watch it first, once you feel you can do it 3d-print…
I used 2 types of steel washers to create the weight: always outer diameter: 30mm, thickness:1.5mm Type1: inner hole (needed for the hole where the foil fits in): hole diameter: 13mm Type2: hole as small as I could find to have the most…
This is a display stand for two tiny pieces of foil cut from the Apollo 13 command module after it returned from its disaster on the way to the moon. The Foils are available from: TheSpaceCollective -…
Here are 3D files, to make this hybrid pumping foilboard using a combination of 3D printing and composite materials! I provid a split version (twenty parts) so that every printer can print it! Split files are inside the provided zip…
Mathematics, often called the "language of the universe," is a realm of astounding beauty and wonder, where simple numbers and patterns can unlock profound insights into the world around us, revealing intricate structures in nature,…
Mathematics, often called the "language of the universe," is a realm of astounding beauty and wonder, where simple numbers and patterns can unlock profound insights into the world around us, revealing intricate structures in nature,…
Foil rake shim: This rake shim allows you to put an angle between your board and your foil. It can be installed regardless of your board or foil brand, as long as it uses a standard double US rail mount. It includes 4 different rake shim…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
I needed to replace a foil on a Tesvor M1 as shown in the pictures. Thus I quickly created one via a 3D printer. Printed with 0.15mm layer, PLA.
Under cabinet mount for Kirkland aluminum foil. You'll have to use duct tape or similar to pull them tight to the foil box. Not great, but it works. You'll also need to flip the model in your slicer to get the opposing side.
Mathematics, often called the "language of the universe," is a realm of astounding beauty and wonder, where simple numbers and patterns can unlock profound insights into the world around us, revealing intricate structures in nature,…
Designed with parametric dimensions so it can be resized as desired. Prints with minimal support. Pieces snap together for alignment and easy glue up if desired. Trefoil Knot.3mf has all the settings I used to print on my i3 MK3. I used…
Will require supports. Other than that, it should be relatively straight forward.
Aluminum foil holder - window sill mount C Clamp design Hole 8,5mm ready for M10 tap. I wanted to print some kind of a screw, but I had some spare old M10s. When tapping use clamp to prevent breaking Made of PET-G
Kitchen aluminum foil used to come in a box with a sharp metal serated edge. Some still does, but the brand we buy has just changed to have only serated cardboard (which is about as sharp as butter). Also, the flimsy cardboard boxes are…
Set of connector hubs for creation 2 frequency geodesic dome yurt. I designed it as a shelter for my daughter, (yeah I could use couple of chairs and blanket but I wanted to try something new :) ) Dome is usable also as a small foil…
My goal was to create a simple model that requires no supports and would print in an acceptable amount of time. For this last requirement, I made the walls 1,8 mm thick (as I am using a 0,6 mm nozzle - you can safely set 0,6 mm line…
Two solar filter foil (e.g. for Baader Astro Solar foil) holder. For a Maksutov 127mm refractor and the viewfiner (38mm). As you can see I marked the filters with a yellow tape, so you can easy see that they are still fitted to the…
NU = Board Nose Up (meaning there should be more front foot pressure needed) ND = Board Nose Do (meaning there should be less front foot pressure needed)
Print in TPU, without supports, 1 top and bottom layer, 2 perimeters, 10% infill gyroid. Position with the flat surface on the build plate. You can increase print speed significantly over the defaults. Recommend printing one at a time, to…
Print in TPU. No Supports needed. Use a bungee to make a loop through the hole, and it goes around the hydrofoil to hold it in place to protect the foil when it's not in use and disassembled.
I wanted some holders to have this tool for cutting kitchen paper, cling film or aluminium foil for food and I made this. Here is the cutting machine I bought in Temu:…
Celebrate the Guiding Spirit in Your Festive Decor
These bearings are the cheapest way to improve your stretch foil packing experience! ..Or any other foil on a paper roll If your boss doesn't want to buy that fancy stretch foil handle for you, print two of these. Useful in a warehouse…
A typical foil socket requires both an 8mm wrench and a screwdriver to fasten the sockets. The wrench is needed to keep the hexnut in place while you use the screwdriver to fasten the socket (see picture of an unmodified socket). I find…
This time made an gift wrapping paper and foil cutter. Design is easy to print couple of parts require supports I used tree supports as they are easier to remove. Device is designed to fit standard utility knife blade and perform straight…
Replaces the original internal Costco Kirkland 400M foil holder. If you have a child that chucked it away for some reason.
I needed a simple solution to organize my tin foil under the kitchen cabinet. The original design was for 4 boxes, but I customized this version to fit just 2 boxes, making it more compact and perfect for smaller spaces.
General information At the end of 2024, I set up version 11 of Helmut Weigl's RoeTest . In the process, I created some 3D designs that I am making available to the community in this collection . You can read more information about my…
You can find full instructions for slicing, printing, and casting here . In addition to the setup detailed at that link, for this model I recommend maximum support overhang of 45° in order to adequately support the mold. The image shows…
A removable hook to hang your epees, foils and sabres. The hook is made to fit on up to 20x20 mm square bar (I've used 19x19 mm wooden bar, but smaller should work as well; don't use round bar, the hook will spin and the weapon will slide…
Little tool to help you holding down the tip of a foil while (un)fastening the little screws. Start by placing the foil tip into the base, while pressing down the tip. Then slide the bottom part upwards to lock the tip into the tool. Slid…
You can find full instructions for slicing, printing, and casting here . In addition to the setup detailed at that link, for this model I recommend maximum support overhang of 60° in order to adequately support the mold. The image shows…
V2 Update: Enlaged holes, as they didn't fit all situations. For mini version, increased tolerances for paper holder. For me the original one is better, but here it is. Note: Overhangs are expected to drop a bit, there is a big tolerance…
JPG file and DAT file are attached. DAT file was created by uploading PNG file here: https://customizer.makerbot.com/image_surface?image_x=150&image_y=135 Suggest to resize x&y to 110mm diameter so you can fit large mugs. Or scale to 50%…
A quick print of a leather stamp for craftool handles. Used this for scouting activities when stamping leather. It will break with moderate use, I print several if there is going to be a crowd. This works best with the Craftool Hefty…
This 3D model is a practical and functional screw-on support designed to hold a roll of aluminum foil on your kitchen door. It’s perfect for saving space and keeping your foil within easy reach while cooking or baking. The support is…
These shims decrease the angle of attack of the stab so that it doesn't generate as much downforce. My understanding is that decreasing the angle of attack decreases drag but perhaps at the expense of stability. I have a 1080 cm² front…
Tin foil boxes have a tendency to fall apart with even the lightest touch these days. I came up with a box and some screw knobs to help retain the functionality of the tin foil blade while also keeping the box and roll together. Should be…
A few of my stabiliser shims blew away in a gust while rigging up so I designed some replacements. I added in 0.75mm and 1.25mm shims to this set as there were times that the standard phantom 1.0mm shim felt like it was not quite right…
A martingale for old foil / sabre body cords. Print info: material: PLA color: black nozzle: 0.40mm layer height: 0.2mm support : yes, tree for legs (due to efforts) filament: 2.00g time: 17m47s Sliced with BambuStudio and printed on a…
165mm between screws centers. Designed for the nut with diameter 19mm(m6/m8). You need to print 2 pairs. They are fully symmetrical. Insert two half into one rail and connect them together inside. Added variation for 20mm/m8 nut.
