1 / 1
Motor mount for 6384 and Flipsky waterproof on KT foil or any foil — zdjęcie 1

Motor mount for 6384 and Flipsky waterproof on KT foil or any foil

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

What is different

Ocena
0 / 5
Polubienia
12
Pobrania
173
Wydruki
0
Wyświetlenia
1751
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print Settings

PETG
height 0.2
no-supports
infill 20%
external perimeter first
perimeters 4
solid layers bottom 5 top 3
seam aligned
speed 80
no fan
bridge/overhange speed 10 fan 80%
width default 0.7 infill 0.5

 

Print settings for the fit pin

PETG
external perimeter first
nozzle 0.4
layer height 0.15
perimeters 9
solid layers 0
speed 10
fan 50%
extrusion width 0
temperature 260
 

Postprocessing

Connect with pins
Back bottom glued to the back top.
PETG glued with R21 thin glue.
PC uses acrylic glue.

Motor: 6384 from Aliexpress

 

Attached 3mf where you can remove the cable guide if you want to.
Attached also stl uncut.


Motor screws 4x M4 x 30
Screws to connect front and back: 2x M5 x 16  + Inserts: 2x M5

Foil-Assist build:
https://foil.zone/t/assist-build-from-israel/20173

Tagi