6384 Motor Mount for Axis 19mm Alum Mast - Efoil / Foil Assist / Foil Drive - Zip Tie Version - V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An updated version of motor mount for a 6384/6374 Flipsky Waterproof Motor
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 138
- Wydruki
- 1
- Wyświetlenia
- 578
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is another update for my foil assist motor mount, this version is shorter than my previous version so there is less swing weight. I recommend printing the cone off in 95A or 64D TPU and the mount in a stiff filament. The big change is inverting the dovetail between the cone and motor mount.
Also remove the bearing retaining circlip, makes cleaning the motor easier. Its not needed.
Previous version:
This is a minimalist motor mount (Flipsky 6384/6374 motor) for a DIY foil drive / foil assist. I modeled a mast mount insert for the red Axis 19mm mast. If you want to make your own mast mount insert, included is a blank motor mount that you can use to Boolean (subtract) your own foil mast but you'll have to model it yourself.
To hold the rear mount to the pod, two 4mm x 60mm screws are threaded into two 4mm hotmelt inserts that are 6mm deep x 6.75mm diameter. Find them on Aliexpress, Amazon, CNC Kitchen etc.
Uses 4mm x 15mm stainless steel bolts to mount the motor, bolt pattern is 30mm x 30mm.
I'd recommend printing the motor mount in a tough filament like PLA+, PETG, ASA, etc. Perimeters use 6 or more, the more you use the stronger it will be but the heavier the mount will be of course.
I'd also recommend using some electrical tape on the mast to help make up any minor gaps and adds some extra friction for the pod to grab.
Use high-quality, UV-resistant zip ties. Install use one full zip tie and thread the tail into a second zip tie with the tail cut off to secure the pod in place. Do this three times. Here are the ones I use: https://amzn.to/45tbzaA
STEP files are included if you want to modify any of the files to work for you.