Hydrofoil Front Wing for SABFOIL Fuselage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hydrofoil Front Wing for SABFOIL Fuselage
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 296
- Wydruki
- 0
- Wyświetlenia
- 2079
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
925cm width, area about 1400cm2.
I used Tom Speer's H105 airfoil section profile.
Do not use Bed Leveling, because it deforms parts and then it is difficult to join. I use raft 3 layers.
When joining the parts, I put 3 layers 250g/m2 carbon on the long side
In the bolt holes I put a mixture of epoxy resin, fine sawdust and chopped carbon.
Then I drilled the bolts openings.
Finally, I flooded 4 layers 250g/m2 carbon, with a vacuum bag.
It's nice to ride, it wants a little more pump than W945, but then slides easier, and it's a little faster. It is good for waves.
Because it has 2 deg. more angle of attack, it needs 1 or 2 deg negative shim.