Hydrofoil Front Wing for SABFOIL Fuselage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hydrofoil Front Wing for SABFOIL Fuselage
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 296
- Makes
- 0
- Views
- 2,079
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
925cm width, area about 1400cm2.
I used Tom Speer's H105 airfoil section profile.
Do not use Bed Leveling, because it deforms parts and then it is difficult to join. I use raft 3 layers.
When joining the parts, I put 3 layers 250g/m2 carbon on the long side
In the bolt holes I put a mixture of epoxy resin, fine sawdust and chopped carbon.
Then I drilled the bolts openings.
Finally, I flooded 4 layers 250g/m2 carbon, with a vacuum bag.
It's nice to ride, it wants a little more pump than W945, but then slides easier, and it's a little faster. It is good for waves.
Because it has 2 deg. more angle of attack, it needs 1 or 2 deg negative shim.