Counting matching models…
Hi everyone. I am P1lotz , a professional 3D artist. I have worked in the field since 2019 and specialize in creating articulated creatures, particularly dragons. With that said, let me present my new articulated dragon, this time with…
Made for any normal drill it is plastic so be gentle but it holds up really well in a drill.
This year I started teaching technical drawing. My school didnt have ani learning utensils to help. So I created some.
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
Spearhead made for use in medieval/renaissance combat. These spears were designed for use in the SCA cut and thrust polearm experiment (approved for use as of July 2024). Print with TPU (ALL PARTS) for them to be flexible. Print the…
Replacement gear for a Kenmore 158 series Hook Drive Gear. Traditionally made with nylon they can crack over time. My sew machine is model 158.18800. Make sure the mark the orientation of the needle and the bobbin holder. I had to…
clips for height adjustment of oarlock hight, model based on standart product from empacher, best works if you use 4 perimetres and 20% infill (with prusamet, may be different for another filament, so upload makes with your experience…
I created a custom mini trash can with swing lid to attach the swing lid i use 2mm steel nails printed in PETG and PLA with no problems supports only for the lid. printed it vertical like in the 3mf file
2 versions one printed with supports and brim - closer to the original other (v5) printed without support, much faster and even cheaper
Star Wars Achsrotation MK4 / MK4S X-Wing Todesstern habe ich mit 50% Infill und einer 0,4 Nozzle und 0,10mm Fast Detail im Prusa Slicer Gedruckt über likes makes und follower würde ich mich sehr freuen, Peace MazZe
0,2 layer Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Running Horses . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The size…
Printed in white/translucent TPU. A CR2032 is the power source. A standard 5mm LED is press/glued into the pearl. One contact is formed into a hook. Need to bend led pins to ensure contact and mobility.
This model was heavily inspired by these two: https://www.printables.com/model/1022658-gridfinity-sewing-thread-holder https://www.printables.com/model/991739-gridfinity-sewing-reelthreadspool-holders I just wanted to change 2 things…
Simple safety guard to protect your finger from accidentally getting in the path of the needle.
I saw some props by a TF2 prop site ( https://www.propfortress.com/ ) and really liked how "reload-able" the props were! So after a few minutes of watching a YouTube tutorial and figuring out how to un-group loose parts in Blender, I…
PETG / Infill 25% Aus meiner Sicht gibt es hierzu eigentlich nichts zu schreiben, erklärt sich doch von selbst. Falls dennoch Fragen sein sollten, schreib mich gerne an. ++++ From my point of view, there is really nothing to write about…
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
I am working on adding a larger heel part soon. The arms must be inserted into the inner sides of the toe arms on the WinWing Orion 2. They jus snap in. The heel part slides in after that and can be fastened inthe preferred position.…
🌹 Unlock the Power of Love with Our 3D-Printed Stencil! 🌹 Transform your love letters, cards, and notes into stunning works of art with our exquisitely designed 3D-printed stencil. Crafted with love and attention to detail, this stencil…
Hello everyone, I have vectorised a technical drawing of one of the first 3D printing patents and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the…
Mechanism for locking a French cleat. Screw → rotate → done. Can be used as left or right This is a remix that modified original wing into a hook shape. hole: Ø 4 mm
Possibly part of a wedding cake topper set. Supports recommended. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
edited parts: BL - Outside Door Block V4 - tested on my enclosure with mk4s BL - Long Outside Door Block V4 - not tested yet Printed with PETG. 0.4 nozzle, 0.25mm Layer For better seal of the plexiglass to the enclosure, i did put m3…
Intro This is a super-mini wing bit holder with a nice handle! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on…
Edit the sketch called "spline" to adjust it to your liking. It's best to just delete the constraints and moving the points with the move tool or dragging them manually. In the past, I've used a combination of plumbing tape and a felt…
I didn't like how the stitch guide on my sewing machine got in the way when it's attached to the machine, but I still wanted to be able to see the options I had available. I have a JW8100 sewing machine, but this probably works for some…
Welcome to our simple project! ❄ Winter & Christmas Tracing Stencils for Kids – 3D Printable Set Add festive joy to your child’s art time with this cozy collection of winter & Christmas-themed tracing stencils ! Perfect for kids, parents,…
Label holder for interchangeable labels/signs of crates. Halterung für austauschbare Beschriftungen/Schilder von Kisten oder anderen Behältnissen.
Welcome to our simple project! 🍁 Autumn Tracing Stencils for Kids – 3D Printable Fall Set Celebrate the cozy vibes of fall with this charming set of autumn-themed tracing stencils ! Perfect for kids' seasonal art, preschool activities,…
These prints are used to make wing-nuts when combined with the appropriate size hex nuts. Note : For related Thumb Nuts and other knob and screw related prints see this collection : https://www.printables.com/@kaje/collections/719205 The…
Baseplate wings for the VKB Gladiator. These attach underneath the base of the joystick and help to widen the base of support.
Windshield side winglets can give a bit an optimised stream of air since the BT1100 windshield is somehow narrow at the top. These are specifically done for 4.5 mm-thick windshield that is curved in two directions. There are three size to…
This is a digital 3D printable model of Malenia's Helm from the critically acclaimed video game Elden Ring . 📦 Included Files STL (cut for 200mm printer beds) Assembled OBJ file (for easy scaling) All cut parts are placed on the print bed…
Ninebot G30/Max back nut cover with Hermes wings.
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
This is my insert for wingspan / Flügelschlag for 1 to 4 players as that's the player count I play with usually. It supports vertical storage but doesn't fit sleeved cards. Content: 4 player mats - I used two double sided boards from the…
Instead of the original zipper, I designed a clip for the swing arm to attach the wire and PTFE tube. Four pieces need to be printed, the models are numbered: one piece of the one, two of the two and one of the three. I printed it out of…
X-wing fighter Another model in the Star Wars Ships series . I enjoy modeling on this topic. This model has over 800 features in the model program. After several modifications and improvements, I successfully assembled it. A screen-used…
For me, the middle gear connecting to the cam did not move far enough down. So I redesigned the middle gear, try it if your handheld sewing machine stops working. Print at 45 degrees or it will break (PLA). Just open the machine up and…
Stencil for quickly making small circles and zig-zag lines for architectural technical drawings
best to print as 80% gyroid or so.
Universal magnetic attachment adapted to the side panel of virtually any metal sewing machine. It allows you to free up your sewing table and have all the bobbins and small tools (screwdriver needles, clips, etc.) at your fingertips.…
Load up in your slicer, scale, print! please credit “ECG TECH or Corporate Memphis” if you sell.
This 3D-printed erupting volcano diorama brings molten drama to your shelf! The model is designed with separate lava insert pieces, which can be printed in red filament and slotted into the volcano's surface. Inside, there's a cavity…
This is a direct replacement front hatch clip for the T1. Features: Can be used to check CG like the original Light weight and Aerodynamic Note: The back plate is not included—and not required. In my experience with this and the original,…
This is a on-wing motor mount with 4mm hole spacing designed for f1204 micro drone motors. I sized it to fit this foam glider: https://www.amazon.com
Designed for Eclipson Hushwing , but should fit many similarly sized models. Fits Caddx Ant Nano camera, HGLRC Zeus Nano FPV transmitter and maximum 4.5 mm diameter antenna for cheap (~$35) and lightweight (~10 g) FPV setup. The camera is…
About This is an insert for the driver's side dashboard shelf on Renault Twingo 2nd generation cars, for left-hand drive variants. If you have a right-hand drive Twingo you may need to mirror the model. The model is derived from a…
A collection of Modwing models for holsters that accept them. Models titled with “Modwing Standard” are 3in tall with typical Modwing dimensions. Models titled with “Modwing Short” are 2.75in Tall. This shorter Modwing gives user more…
In the new GONG back wing / stabilizer system, you can adjust the back wing/stabilizer’s angle of attack using a shim. Here we have two shims: one for 0 degrees – which is needed if you want to ride without any adjusted angle of attack –…
A stand for a drawing pad that works with modular desk clamp
SBACH 342 EPO RC airplane repair kit for wing mounting plate for insert nut plate for 5mm nylon bolts For 5mm bolt and 5mm nut If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★ Thank…
A simple and fun swing for cages, designed for small to medium-sized birds. It’s made of four rings connected with string or wire, creating a playful hanging structure for climbing and swinging. Lightweight, easy to make, and perfect for…
Capture the powerful grace of flight with this 3D printable STL model of a Cute Eagle with Wings Spread. This soaring predator is perfect for adding a dynamic and majestic presence to your displays, shelves, or miniature wildlife scenes.…
Capture the lively spirit of the farm with this 3D printable STL model of a Cute Rooster Crowing. This cheerful sentinel is perfect for adding a touch of rustic charm and vibrant farmyard life to your displays, dioramas, or miniature farm…
Experience the dramatic allure of automotive design with this 3D printable STL model of the Mercedes-Benz SLS AMG. This iconic gullwing sports car model is perfect for automotive enthusiasts looking to display the unforgettable styling…
I designed this to be a bit more realistic (even though it is imaginary). Made the body section bigger and added wings. I've had good luck printing it at .3mm. Looks better at .2mm but takes a lot longer. I've also had luck printing it at…
I didnt know where to place my Garmin watch when rowing, so I made myself one, made another one for the normal thing for boots
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Cantilever Tool/Sewing Box Remix (PLA-Optimized, Modular Joints) This remix of the popular parametric cantilever box features a key modification for easier, faster printing and improved stability, especially for PLA users. Key Features of…
cover for front towing eye for skoda fabia mk1 (may fit more models, since vw shares parts like this acros multiple models and generations) aditional hw: 2x DIN 912 - Hexagon socket Head Cap Screw - M3x40 (or more) 2x DIN 982 - Prevailing…
Spring clecos are great, but when you absolutely, positively need your structure held together tight while you drive the rivets, use draw clecos. This tray will hold 2 each draw clecos of the wing-nut tightening variety, up to 1" grip…
Updated 01.25.26: Increased tolerances to accommodate different materials. This is an 8 point shuriken ninja throwing start that allows you to add a US quarter in the center for weight. The cap can be removed using tabs to retrieve the…
Simple 4 point shuriken throwing star. I also have a weighted 8 point version that uses a US quarter for weight: https://www.printables.com/model/1482626-weighted-8-point-shuriken-ninja-throwing-star-with Simple, quick, easy print with PLA.
A hinged metal arm for 3D printers, simplifying cable management with durability and easy maintenance in mind. Based on the open-source PRUSA SwingArm, this short, hinged metal arm guides a sleeved cable bundle (or a USB/CAN cable). The…
Simple fix for loose threads. Made to fit connecting threads brand 1200 yard spools. It even holds them at 90 degrees! Holds 16 spools.
Here’s a little something for fellow Expedition 33 fans. A digital 3D-printable Glowing Monolith Book Nook . Think of it as a tiny slice of the expedition tucked quietly between your books, humming with that familiar yellow shimmer.…
Da mein Rundenmarker in die Mulde für den Rundenmarker nicht hineingepasst hat - ich vermute, dass der Marker in der deutschen Version etwas größer ist, habe ich einige Anpassungen an Zeros Design vorgenommen. Ich wollte bei den Trays für…
Collection of stickers, there are made from images that I found interesting from time to time, some of them are for halloween. These are 2mm thick if printing with glow in dark material recommended 100% infil for best glow or make them…
IMPORTANT: holes have been sized to print correctly at 300% scale! Scale all stl parts in Prusaslicer before slicing. 3mf files have already been scaled. Modified the excellent model by fasteddy to function as a tree-top ornament. With…
T-Nut pliers holder remixed down to 41mm width to hold the Knipex TwinGrip 82 02 200 Pliers.
A simple heatbed knob for M3 wingnuts. It is 40mm in diameter. The wingnut knobs for heatbeds I have found are pretty small, so I made a bigger one.
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
Engine support for FliteTest Versa Wing For engine diameter 35mm (EMax Gt2812/06 ) Weight 14g Category: R/C Vehicles
☀ The Solar Seraph Dragon A mythic, god‑touched, sun‑wreathed dragon suitable as a capstone boss, patron, or world-shaping entity. 🌞 Lore & Mythology Legends tell of the Solar Seraph , a colossal golden dragon born from the first sunrise…
Tool caddy to hang on the edge of a splash pan. Works with Shimp-VL wheels or any 19" splash pans. Dividers are removable and work well if you use 2. One compartment for a rib, and the other 2 for thinner tools such as a needle. Side…
This bat system should work with any wheel where bat pins are spaced 10" apart! Will print with most standard FDM print beds (250 mm x 250 mm / 10" x 10"). Use Notes: Assemble by sliding component A and B onto the dovetail on component C.…
Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…
I made a mount for the Speedybee wing mini flight controller for the AtomRC Dolphin base to fit the "AtomRC Dolphin Base Plate For SpeedyBee F405 Wing" ( https://www.thingiverse.com/thing:6070334 ). Not a remix, but I figured it be easier…
Organiser for for for sewing thread spools but can also be used otherwise. Pins are separate enable different pin colors or leave a space.
winged dragon on a mountain of gold coins If you like it, give it a follow, like and download it, it helps me a lot. Thanks for the support!
Heckspoiler für Carrera Porsche 935/78 (hier "Martini Racing), im Maßstab 1:32 Nach dem Drucken ist etwas Schleifen mit feinem Sandpapier auf der Rückseite notwendig, wo die Stützen befestigt waren. Ich habe die *.f3d Datei aus Fusion360…
Screwdriver for 4mm wing-shank style bits. for example a BP4 bit
Holster wing/claw & small wedge for a DeSantil Slim-Tuk. Wing has a slight opening to slide onto the belt clip and the wedge is slightly contoured to sit flush along the back of the holser. The wedge pictured is held by a small command…
