Movi Pro / Miller / Manfrotto - Multi tripod plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to quickly switch between a Movi Pro and Miller / Manfrotto Tripod.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Model
This is a combined tripod plate allowing you to switch seamlessly from a Freefly Movi Pro to a Miller DS series tripod in seconds. It is similar to the Ignite Digi Gimbal mate which combines the Movi and Ronin 2 Plates.
If you would like to see other combo plates please let me know.
Print Settings
I would highly recommend printing the camera plate with 8+ walls and a strong, stiff filament like PC, PPS-CF or PA6-CF.
Parts needed
3/8"-16 or 1/4"-20 Tripod Screw
Installation
(1) Attach as a normal camera plate
(2) Switch between gimbal and handheld in seconds!
Disclaimer
As the mating Movi plate interferes with the bottom side there is no room for a safety lock on the tripod plate, please be careful when using the plate on a DS series tripod as it will slide right off if it is not properly tightened.
I also do not recommend attaching more than a mirrorless / DSLR sized rig unless you are using an engineering grade filament or metal plate.