Parkside 20V battery adapter COVER

📝Description

This is a 3D-printed cover for my Parkside power plug adapter for Li-Ion 20V battery that turns it into a portable power source.

You have to download and assembly Parkside power plug adapter for Li-Ion 20V battery   (or you can use as a cover without plug if you want).

📦 Bill of Materials (BOM)

Item	Quantity	Description	Image
1	2	M3 × 6 mm socket head screw (DIN 912 / ISO 4762)
2	1	Parkside power plug - Screwable version                 or   Parkside power plug - Glueable version       You can choose either version. The only difference is how the connectors are secured: In 1, they are held in place by a screw-tightening mechanism, while in the 2 the contacts need to be glued in.

🔧Printing & Assembly Note

1. Feed the wires from power plug through cover,

2. Place assembled power plug adapter into place,

3. screw it together with cover.
   

⚡Safety note

Please keep in mind, that Parkside 20V Battery DOES NOT have build-in undervoltage protection, so it's not a good idea to use it as a power source without any protection. 

Despite the relatively low voltage, this project involves electrical connections, including Li-Ion batteries capable of storing large amounts of energy.

Depending on the materials used, print quality, electrical connections, and assembly method, there may be a risk of fire, short circuit, overheating, or electric shock.

Before starting any work, make sure that you have sufficient technical knowledge and experience in working with electrical systems and batteries. If required by local regulations, ensure that you hold the appropriate qualifications or permissions.

Always use proper insulation, adequate wire gauges, and suitable protective components (such as fuses or circuit protection) when integrating this adapter into a project.

The author assumes no responsibility for any damage, injury, or loss resulting from the use, modification, or misuse of this model.