Rick the Pickle Exoscheletone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Detailed Pickle Rick in his DIY rat exoskeleton. Printed in PETG and hand-painted. Slow print for maximum detail
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a highly detailed model of Rick the Pickle in his improvised Exoskeleton (rat-suit). It’s a must-have for any Rick and Morty fan and a great piece for testing your printer's ability to handle intricate mechanical details and organic textures.
My Print Settings & Process
To get the best results, I focused on precision over speed. Here is how I achieved the look in the photos:
Material: Printed in White PETG. I chose PETG for its durability and slightly better impact resistance for the thinner bone structures.
Post-Processing: After printing, I hand-painted the model to bring out the grittiness of the rat bones.
Print Speed: I highly recommend lowering your print speed (around 30-40mm/s for outer walls). Slowing down is crucial for this model to ensure the small joints and "bone" details print cleanly without stringing or loss of detail.
Supports: Required (Organic/Tree supports work best to minimize scarring on the textured surfaces).