Print Sheet Holder - Side Load Version - Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the original model and then discovered the side load version which seemed even more appropriate for my application but I wanted to mount this to the inside of my L desk wall. I removed the holes in the back and added thru-holes countersunk to match Kreg pocket screws. I also enlarged the side chamfers where the sheets get slid in on both ends of the model.
Screw Hole diameter - 4.4mm | Screw Head Countersink diameter/depth - 9.5mm/3.9mm
I recommend printing with a brim unless you are very confident with your built plate adhesion but you will know your printer best. Orient at a 45 degree angle for smaller print beds.