Print Sheet Holder - Side Load Version - Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Larger side chamfers and countersunk holes for mounting to the wall. Holes sized for pocket screws but should fit many.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the original model and then discovered the side load version which seemed even more appropriate for my application but I wanted to mount this to the inside of my L desk wall. I removed the holes in the back and added thru-holes countersunk to match Kreg pocket screws. I also enlarged the side chamfers where the sheets get slid in on both ends of the model.
Screw Hole diameter - 4.4mm | Screw Head Countersink diameter/depth - 9.5mm/3.9mm
I recommend printing with a brim unless you are very confident with your built plate adhesion but you will know your printer best. Orient at a 45 degree angle for smaller print beds.