Umarex Gauntlet 2 Barrel Band
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple barrel band designed to stabilize the barrel and air reservoir on the Umarex Gauntlet 2.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This STL file provides a straightforward, no-frills barrel band for the Umarex Gauntlet 2 version. It is designed purely for functionality, clamping the barrel to the air reservoir to reduce flex and vibrations, which can enhance shot consistency and accuracy.
Key Features:
Easy to Print and Install: No supports required if printed flat on the bed.
Material Recommendation: Use durable filaments like PETG, ABS, or PLA+ for optimal strength and heat resistance, as the reservoir can warm up during use.
Dimensions: Based on standard Gauntlet 2. Verify fit on your specific rifle. A quick 5mm test print section should be sufficient to check tolerances and scale the model if needed.
Installation: This is a friction fit design. Simply slide or snap it onto the barrel and reservoir. Ensure a snug fit. If it's too loose, consider reprinting with adjusted tolerances.
This model is inspired by common aftermarket barrel bands but kept minimalistic. If you experience barrel droop or grouping issues, this can be a quick fix. Share your makes and feedback on Printables!
Note: Always follow local laws regarding airgun modifications. This is for non-firearm air rifles only.