300mm disc for (Aliexspress) Turntable 13.8cm wide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the small 13.8mm turntable I created this larger disc to put on top
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently I bought a 3D scanner. Scanning isn't as easy as I was hoping for. Getting all around an object for instance. I tried several things. I printed a manual turntable but that isn't working for me. Also hanging the object on a string. Works rather good but the movement of the 'pendulum' sometimes is a hassle, also getting it to rotate at the desired speed is not easy.
So I decided to buy a cheap turntable from Aliexpress. For a few bucks you get a nice little turntable with several options (3 speeds, rotation direction and 3 'swivel' functions). Can be powered by USB, 3xAAA batteries or one 18650 cell. It can also be bought with remote control and larger surface but price goes up. Also, the largest disc is 20cm. I like it even bigger so my scanner can only see the object and the turntable surface (no surroundings).
So, for the small 13.8mm turntable I created this larger disc to put on top. I added 3mm holes all over the surface in case I want to attach something (like a stand)
Also I created a base on which the turntable can be placed. This base has 3 rods which extend past the disc so I can push the buttons on the small turntable which is completely out of reach because of the huge disc on top of it.
Additionally you need 8 M3 bolts of about 10mm to fasten the top above the prolonged buttons.
Because of tolerances (printing tolerances but also production tolerances of the turntable) I added 4 discs with different inner diameters: 138.0mm / 138.2mm / 138,4mm / 138.6mm. Of coarse it isn't exactly a good idea to just print-and-pray, I also added a file with 4 small test rings (5mm high, 2mm thick). Each ring has small dents to identify them, at 2 opposite places there are 1, 2, 3 or 4 dents:
1 dent on each side: 138.0mm
2 dents on each side: 138.2mm
3 dents on each side: 138.4mm
4 dents on each side: 138.6mm
So first print the 4 rings, test which fits best, then choose the right model to print.
Optionally you can M3 bolts to fasten things on the plate. Bolts go from bottom to top