Battery powered Designer Lamp-001
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery powered designer lamp with 3v led filament
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Battery Powered Designer Lamp
This lamp is powered by three AA batterys which are held in place by a round battery holder from aliexpress(see BOM).
The light source is a 38mm 3v led filament which sits on an holder in the middle, the current is regulated by a 22 Ohm resistor but you can change it depending on what brightness you like.
BOM
Battery Holder (chose AA)
22 Ohm Resistor
Optional: 3x Anti-slip feets 7mm
Filament I used: PLA white
PLA Matte oliv green(not the bes printing experience)
Print Settings
All parts are oriented corectly
0.4mm Nozzle 0.2mm Layer height
Bottom surface flow ratio around 1.3 works best for me Bottom surface pattern Archimedean Chords
Supports
Normal auto Snug On built plate only
For the Top Plate
Ironing Bottom and Top surface pattern Archimedean Chords
For Lampshade
Spiral Vase Mode
I'd be happy to see pictures of your build. If you have any suggestions or ideas for improvements, feel free to message me.