3DO Nozzle Cam Dragonburner Clip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple clip mount for 3DO Nozzle Cam on Dragonburner DB8. Compatible with Micron and Voron 2.4 / Trident printers.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I made a simple clip mount for the 3DO Nozzle Cam on the Dragonburner DB8. Compatible with Micron and Voron 2.4 / Trident printers. It also fits the Voron V0, but without using the front door.
I use DB8 with a 2510 fan.
You will need a 3DO Nozzle Cam - Not Glued, because you need to adjust the focus closer to the camera. You will also need a 25 cm long flex cable with LED.
Simply thread it through the mount as shown in the attached pictures and snap the camera onto the flex cable.
The flex cable needs to be carefully shaped to fit under the outer fan.
After preparing the flex cable and carefully sliding on the fan, simply snap the mount with the camera into place between the fans from the front.
The model is designed for easy slicing with an integrated support.
Printed from ABS with a standard Voron profile. 0.4 mm nozzle, 0.2 layer, 3 perimeters.
The camera has been working perfectly for a year.