Renault Rear Badge Emblem – 3D Printable Replacement Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable Renault rear emblem. Designed for outdoor use with ASA and strong double-sided tape
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 3D printable Renault rear emblem badge, designed to replace or customize the rear logo on Renault vehicles.
Perfect for restoration projects, custom builds, or replacing missing or damaged badges.
The model is optimized for outdoor durability and easy installation.
🔧 Printing Recommendations
For best durability and heat resistance:
Material: ASA (recommended)
Infill: 100%
Layer height: 0.2 mm
Walls: 3–4 perimeters
Print orientation: flat on the bed
Supports: not required
🧼 Installation Tips
Clean the surface thoroughly (preferably with isopropyl alcohol) to remove dirt and grease.
Use 3M double-sided automotive tape for strong and long-lasting adhesion.
Press firmly and let it bond for several hours before washing the car.