Liczymy pasujące modele…
This is my easy-to-print organizer for all of my stuff. It fit the cabinet below my armrest perfectly. It can store a pen, some cash/coins and lots of other things you want to have with you and organized in your car. I printed it with a…
The cap for the lumbar support adjustment lever of a Renault Megane Mk3. it is is designed to only fit in the correct position.
Remix of the @JobPrinter model, almost identical, it fits great in the car.
Simple phoneholder for our Renault Megane III 2013. It hooks safely into the vents and the hazard switch and unlock button are accessible. The holder gives a tight grip on the phone with the original silicone cover (that comes with the…
Ersatz Gummipuffer Heckklappe am Megane 2 Coupe Cabriolet. Da dieses seid Jahren schon nicht mehr bei Renault verfügbar ist, habe ich selber einen Designend. Die Montage ist etwas unentspannt, da die Aufnahme sehr eng ist. Mit etwas…
This is cover for Headlights on Renault megane, if you have LED lights so that electronics fit inside the cover. you ned supports for latches. it is printed on the flat side Print instructions Print Settings Printer: HyperCube by Tech2c…
The “lever” that moves the horizontal part of the vent on a Renault Megane Mk 3. I didn't add the shelf that holds the little metal tensioner part since I lost mine and the feature looked too small to print, anyway it works just not as…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings Notes: I recommend to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
In my renault megane 2004 is a little bit different, so I modified the part for my own need. There is no upper hole on mine, and the bottom hole is deeper. Thanks for the original design. Category: Automotive
It's a cover for Renault Megane 2 obd2. Its also adds a usb charging port.
Basically as the summary says, it's a trunk shelf clip thingy for a Renault Megane (and possibly other cars, not sure) Make sure to print this in ABS/ASA or nylon, so it doesn't melt in your car. That wouldn't be a very good time I bet.…
Blueprint généré à partir d'une image.
Ive made a frame/holder for the window control button/switch to my Renault Megane. This is the one on right side doorhandle. The frame is there to hold the switch in place. Its snaps in to the fittings. Ive printed the part upside down,…
Its a bit bigger than it needs to, but the the rectangular hole can be cut out easily. Then, it can be hammered in with medium force and then it fits perfectly. Print upside down.
Buy me a coffee: https://ko-fi.com/jokereuc
Replacement for the hood block of the Renault Megane 2 Cabrio from 2007, easy to print I include the editable file for freecad Use TPU or some flexible material, do not put too much padding to make it absorbent, between 5% and 10% is fine
The rear Renault logo for model 2015 Scenic (Grand) III, Megane, Fluence
Replacement key Renault Megane Scenic but key is not used for opening doors. Only for cosmetic looking. Fillement of your choise.
Anello di supporto per tweeter per Renault Megane 3 Tweeter support ring for Renault Megane 3 Category: Automotive
You can resize to needed dimensions. For bigger prints, cut it in slicer and glue/weld together.
About model Bit modified Renault Megane IV keychain of Ninuki's model on Thingiverse. Compatibility Size: 80x30 mm (without eye for keyring) Modifications Adjusted heights for 4-colors print at 0,15 mm layer height. Print info Its an easy…
The dashboard of the Renault Megane 2 is very round. I made this model of a cover for an autoradio, so I could adapt my regular rectangular radio to the dashboard. No specific infill recommandation for that model. Feel free to adapt the…
Renault Megane keychain Category: Keychains
Part number 20100993
Renault Megane Sedan 2006 keychain
The Renault Megane II has a card instead of a key to open and start the car. This key is likely to break when you put it in the pocket. This case will protect the card from bending and gives easy access to the buttons and key chain.…
3D model of the rear bumper tow hook cover for Renault Megane III . This model replicates the OEM part with number 511650005R . The model was designed from scratch based on the original part geometry and bumper mounting shape. It can be…
Updated .scad file. Needs MCAD library.
Encontré este magnifico diseño de llantas le agregue la cubierta,y un cuello a las ruedas delanteras para poder conectarlas con el eje de dirección delantera de un viejo (Y muy deteriorado y en vias de restauración) Renault Maxi Megan.…
Enhance the comfort and stability of your MeganeX Superlight 8K with this custom-designed front harness. It slides over the front of the headset and provides mounting points to attach the default soft strap via side brackets, offering a…
Cable Support to prevent bending or breaking the USB-C Port on the Breakout Box. To avoid getting a loose contact.
Soporte para megane 2. Estupendo para calmar a las fieras
1:1 scale model of a Meganeura, a giant extinct species of dragonfly. I recommend printing everything with a low layer height or on a resin printer. For the wings, you will need to print two of each wing file, and then slide them into the…
luggage compartment curtain - roller slider Category: Other
Trunk lid holder
Buy me a coffee: https://ko-fi.com/jokereuc
I recommand to print it with 40 % gyroid infill, for strength. Beware the model is the right pin. Remember to flip it if necessary.
Roof rack fixing plate replacement for Renault Megane MK2 --- If you'd like to support my work https://www.buymeacoffee.com/bitn
Small coin sorter that fits into the cupholder of a Megane III. Please rate the print and post a picture of your make. I hope you enjoy! If you do, consider buying me a coffee. Thank you PayPal: @MisaelSteinmayer
These adapters are made to fit the MeganeX Superlight 8K using the Modular Facial Interface developed by Akari, and adapt it to utilize Bigscreen Beyond style head straps. The source for the main interface is found at their site:…
In my pursuit to breathe new life into my classic Renault Super 5, I encountered a small yet intriguing challenge. I scoured the internet for a female plug that would perfectly suit the Renault Megane window lift mechanism, but nothing…
This adapter is for the Renault Megane 3 (and probably many others) it adapts 3x USB ports for charging and a 3.5mm jack This can be used like i did to connect 1 USB to a hidden charger behind the dash, 2 USB + 3.5mm jack for a generic…
Print with PETG, 100% infill. This will help center 67.25mm wheel.
Charging port cover for Renault Scenic / Megane e-tech - Right side This is a remix of : As the Renault Scenic E-Tech and the Renault Megane E-Tech have the charge port on the right side of the car this model should now fit these cars.…
Physical product of this facial interface will be going on sale at tiramixr.com late October! People might know me from the Akari MeganeX Modular Interface, but this is a completely revamped model in collaboration with Studioform over the…
Since I lost the Megane 2 Door Pull Handle Upper Cover, my 3D printer helped me to make a cover for it. Instead of making the cover plain, I wanted to produce it with the Renault logo on it.
0.2 layer with 2 top layers and 2 base layers . Use 3 perimeters In this configuration you can use the fill to create an effect on the light. I recommend using 15% infill and Hilbert Curves as the infill. Camada de 0,2 com 2 camadas de…
A button adapter designed to fit the Renault Megane 4 fuse box cover. Allows for the addition of four 15x10mm buttons. Link to some of the buttons. (I used the amazon ones) Amazon Aliexpress Print settings Infill 15% Material PLA Support…
Project Overview This project features a custom-designed PCB , a connector arm that links Akari’s Facial Interface to the AVP Solo Knit Band or AVP Dual Knit Band and a cable guide for clean cable management on the AVP Band. Connector Arm…
Manette pour baisser le dossier du siège passager, sur une Renault Megane III break (Megane 3 estate) En remplacement de la pièce D 4438 639 Version 2 : plus solide (remplissage 30%)
This print allows you to replace the original tweeters with other tweeters. Personally, I used Focal tweeters , but I've shown you the model without holes. Link Amazon : https://www.amazon.fr/dp/B093X1L666
Plaque Renault Mégane RS Possibilité d'impression en 3 couleurs dans le slicer Fichier F3d à disposition pour les remix Modèle d'imprimante : COREONE Type de filament : PLA Filament utilisé : 104,75 g / 35,12 m / 84,48 cm³ Température du…
This is a replacement part for the rear luggage cover (parcel shelf) support bracket on the Renault Megane Grand Tour (MK2). The original plastic clips are known to become brittle and break over time; this 3D-printed version offers a…
This gasket improves stability by replacing the hinge with a fixed element with added brackets for a soft strap. The current version (V1), was modelled for my face shape so the fit may not be ideal for everyone. I include 4 variations…
3D Renault Megane RS Model Keychain Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Lower Print Until Undercarriage Touches PrintBed (optional) Print Settings Printer Brand: Creality…
Needs to be soft tpu else its hard to remove the cover.
Gear for locking mechanism in Renault Megane I, based of the broken one shown on photo. Tested and works correctly.
mirror the STL to get 7700848790
A small part to replace the very easily broken plastic shift knob peice that is found on Megane RS 250/265/275 models. Allows you to fit OEM shift knobs including the weighted RS shift knob. Best printed in a filament that can resist the…
Renault Megane MK3 Sunroof Slider Repair Clip / Vibration Damper (TPU) This is a custom-designed replacement for the sunroof slider clip on the Renault Megane III (all body styles with a panoramic roof). The original plastic clips are…
Trunk carpet screw for Renault megane 3
Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…
Parking Brake Cable Clip – Renault Megane III Replacement parking brake cable clip for Renault Megane III. Designed to replace a broken or missing handbrake cable retainer without the need to buy the full cable assembly. This part…
3D Renault Megane RS Model Keychain Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Lower Print Until Undercarriage Touches PrintBed (optional) Print Settings Printer Brand: Creality…
two-color keychain, layer height 0.16 mm
Cover the front console and hide your items from prying eyes. I used a carbon fibre patterned plate to make it look a bit nicer. Printed in ASA.
This allows the mounting of the excellent Koss Ksc755 or Porta Pro drivers to the hard strap available for the Meganex 8K superlight. Required Materials Two M5x20mm screws with nuts (locknuts are best) Some thread locker if you have no…
Organiser for armrest renault megane 2016-2022. Splitted to two parts to fit more stuff. Changed height of top part. Removed one wall to fit wallet inside. Suitable for renault megane 4, renault megane IV.
Armrest raiser Renault Megane Grantour IV - 45mm Bottom fits three 21mm adhesive cushions. Recommended print settings: Perimeters: 4 Avoid crossing perimeters: True Material: with high temperature resistance at least PETG to withstand…
Se li stampi blu sono perfetti 🤣 Loop pareti 6 Riempimento 50% PETG (meglio ASA) - If you print them blue, they're perfect 🤣 6-wall loop 50% filling PETG (ASA is better) Category: Other
This model was done on a Core One + making the print in PC more reliable with less warping. The part is quite thin so not enclosed printers will suffer warping. I used a brim to improve adhesion. It uses one hole on the sheet metal, but…
This adapter is for the Renault Megane 3, Fluence it adapts 1x USB ports for charging. The charging board MH-KC24 was used, the step-down converter was 6-32V 5V
Wife complained that her glasses kept sliding out of the tray in her Megane E-tech. I printed this little tray in TPU to make it less slippery with higher sides.
This is a repair solution for the pull handles of the rear doors of our Renault Megane 3 Grandtour. If you have a car that has powered windows you will have to modify the file for the switches. When removing the door card the clip part…
Added longer lip at the bottom to fit skadis board where you can add license plate number or name of car.
Please find my latest and much improved facial interface in collaboration with Studioform down below! NOTICE: For most people, please use the V2/V3 interfaces instead of the original. It has more refined supports, mounting mechanisms, and…
Car manufactures use a plunger for locking the charge flap. The mechanism is reused from ICE vehicles. Where fuel flaps stay only a few minutes open per week, charge flaps are exposed to all kinds of weather from lets say 30 minutes to…
Renault Fluence/Megane III Phone Holder Vent Hook Design: Clips securely into the air vents. (Thanks to @Misael 's Renault Megane III phone holder Redmi Note 9s / 10s Iphone 13 ) Universal Fit: The phone bracket is adjustable via a…
Lever for opening the passenger seat in the 3-door Megane 2 hatchback.
It's a cover for Renault Megane 2 obd2. Its also adds a usb charging port.
1:1 scale model of a Meganeura, a giant extinct species of dragonfly. I recommend printing everything with a low layer height or on a resin printer. For the wings, you will need to print two of each wing file, and then slide them into the…
This gasket improves stability by replacing the hinge with a fixed element with added brackets for a soft strap. The current version (V1), was modelled for my face shape so the fit may not be ideal for everyone. I include 4 variations…
This is a replacement part for the rear luggage cover (parcel shelf) support bracket on the Renault Megane Grand Tour (MK2). The original plastic clips are known to become brittle and break over time; this 3D-printed version offers a…
This adapter is for the Renault Megane 3 (and probably many others) it adapts 3x USB ports for charging and a 3.5mm jack This can be used like i did to connect 1 USB to a hidden charger behind the dash, 2 USB + 3.5mm jack for a generic…
The Renault Megane II has a card instead of a key to open and start the car. This key is likely to break when you put it in the pocket. This case will protect the card from bending and gives easy access to the buttons and key chain.…
This model is a 1:1 scale, print in place, no supports, articulated representation of Meganeura which was a giant flying insect closely related to dragonflies, it lived 300 million years ago. Meganeura was the largest flying insect known…
![[LEGACY] Akari's MeganeX Modular Facial Interface](https://media.printables.com/media/prints/531ade18-4932-4d9c-bdd6-f7ee8f904405/images/14225010_01dbb300-fc5d-43c0-bc74-b03934bc1b5c_b238d5da-8dd9-44c0-8667-0735afa519ab/screenshot-2025-05-13-111453.webp)
