Renault Megane 3 rear door pull handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the original broke off when trying to remove the door card.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a repair solution for the pull handles of the rear doors of our Renault Megane 3 Grandtour. If you have a car that has powered windows you will have to modify the file for the switches.
When removing the door card the clip part broke off - later the handle was lost and I had to come up with a solution.
Instead of printing the clip part directly onto the handle I designed a clip that uses a 3mm heat insert and is clipped from below into the door card. Then the handle is put on and secured with a 3x20mm bolt.
Its probably a good idea to print it from PETG regarding reliability. I have included a picture of which orientation I printed it in so the top is nice and smooth.
Printed at 0.24 layers and 10% infill - its plenty strong.