Renault Megane 3 rear door pull handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
the original broke off when trying to remove the door card.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a repair solution for the pull handles of the rear doors of our Renault Megane 3 Grandtour. If you have a car that has powered windows you will have to modify the file for the switches.
When removing the door card the clip part broke off - later the handle was lost and I had to come up with a solution.
Instead of printing the clip part directly onto the handle I designed a clip that uses a 3mm heat insert and is clipped from below into the door card. Then the handle is put on and secured with a 3x20mm bolt.
Its probably a good idea to print it from PETG regarding reliability. I have included a picture of which orientation I printed it in so the top is nice and smooth.
Printed at 0.24 layers and 10% infill - its plenty strong.