1 / 1
Magnetic Field Probe - 50 by 10 by 11 Magnet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3d printed magnetic field probe designed for a 50 by 10 by 11mm bar magnet
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a print in place magnetic field probe. Use this to view 3d fields around magnets.
A 50mm by 10mm by 11mm magnet fits inside the holder, although some might be loose.
To make the probe work with weaker magnets, I found taping two 10mm by 2mm neodymium to the ends makes it work better.
See my print in place model for 6 by 3mm neodymium magnets if you want one with just the neodymium magnets and not the bar magnet.
Print Settings
0.2mm layer height or finer.
15% infill and 2 walls.
