3/4 Scale Railroad Carriage Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carriage light for inside a 3/4" scale 3.5" gauge carriage
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made these light fittings for inside a 3/4" scale carriage that I'm restoring. Published here in case they are of use to anyone else.
The lamp bowl is vacuum-formed around the buck I used, with 0.25 mm clear PET. The lamp body needs to be printed in a dark filament to prevent light bleed.
I used 10mm LED's as I had them on hand but they needed to be cut down to size, this also stops the LED having a focal point, there is a jig that I used to cut the LED's to the same size.
The light is roughly based on a typical carrage lamp; however, it is sized to suit the 10mm LED and has space inside for a resistor and the wires.