3/4 Scale Railroad Carriage Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carriage light for inside a 3/4" scale 3.5" gauge carriage
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made these light fittings for inside a 3/4" scale carriage that I'm restoring. Published here in case they are of use to anyone else.
The lamp bowl is vacuum-formed around the buck I used, with 0.25 mm clear PET. The lamp body needs to be printed in a dark filament to prevent light bleed.
I used 10mm LED's as I had them on hand but they needed to be cut down to size, this also stops the LED having a focal point, there is a jig that I used to cut the LED's to the same size.
The light is roughly based on a typical carrage lamp; however, it is sized to suit the 10mm LED and has space inside for a resistor and the wires.