SKADIS + AsRock N100DC-ITX (or other mini-ITX motherboard) mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalist mount for an ITX motherboard with an optional 120mm fan.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
An IKEA SKADIS mount for your mini-ITX motherboard. It's designed for the AsRock N100DC-ITX, but will most likely fit other boards, too.
It's very sturdy, prints without supports and if parts are positioned as recommended, layers will be aligned for maximal strength.
The upper half is optional, needed to hold a 120mm fan in place. This piece is specific to the N100DC-ITX, but even this board will function without it (just make sure you throttle it, otherwise it gets toasty without cooling).
Printing and materials
I used PETG with 25% fill. All parts fit the 18x18 plate of a Prusa Mini.
Assembly
You need four 50mm M4 bolts and nyloc nuts for assembly if using the upper half. If not, use shorter 12mm bolts, or 15mm and some washers.