Makergadget Professor 3d Enclosure edge covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the pieces i created to cover the edges of the makergadgets professor 3d printer enclosure.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
These are pieces to trim out the Professor model 3d printer enclosure from makergadgets. They will probably work for other models as well.
There are specific parts for around the vent on the right side. And the 'plug' is for the left bottom round hole. It should press in and stay without glue or screws.
I printed in a Prusa mk3s+ with PLA and no supports. I used the default print setting '0.20mm Speed' and it worked fine.
You can glue to the enclosure, double sided tape, maybe even velcro or glue to itself in sections to make it removable. This is important if you plan to utilize the removable front panel. I'm utilizing the bottom pieces that are cut off and then gluing it all together to itself as a removable cage of sorts. Just an idea.
I'm sure they can be make a lot thinner to print faster but I liked the rigidity of these. Feel free to play with these yourself and share if you make a better version.