TPU Capes for The Flexy Stick Figure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are three awesome capes you can make for your Flexy Stick Figure.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are three awesome capes you can make for your Flexy Stick Figure. The Flexy Stick Figure is a flexible stickman toy made from silicone or TPU.
These capes are modeled after the LEGO pieces 79786, 15428, and 30381, but made to work with this stick figure. All of the capes can be printed without supports if they are printed in their default orientations! I recommend printing each with 90A or 95A TPU filament, 2 wall loops, and 15% gyroid infill. The "Flexyman_Hooded_Cape" file will also need to be printed with a brim. Enjoy.
Get the files for The Flexy Stick Figure here.
Get a display stand for The Flexy Stick Figure here.
Check out the entire Flexyman collection here.