1 / 3
ZX-4R Rear/Pillion Seat 3D Scan — zdjęcie 1
1 / 3

ZX-4R Rear/Pillion Seat 3D Scan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Laser scan of my zx-4rs rear pillion seat.

Ocena
0 / 5
Polubienia
4
Pobrania
35
Wydruki
0
Wyświetlenia
141
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

This model is a scan of my zx-4r's rear pillion/passenger seat. Use it for what you will. Lost, ripped or broken seat? This should hopefully help! Will slowly start to create a catalog of scanned parts as I do mods on the bike or whenever I take it apart for maintenance. If you have any bike-specific requests, let me know. 

The included ply/blend file is the denser mesh, with the STL being the reduced version.

The model was scanned with my Metro X scanner at 0.3mm resolution. Alot if the mesh under the tabs could not be properly captured and therefore I had to manually clean it up. 

Tagi