1 / 10
K1C & K1 Series - Vented Riser V3 with LED strip rails (Sprintech Remix) — zdjęcie 1
1 / 10

K1C & K1 Series - Vented Riser V3 with LED strip rails (Sprintech Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Riser for Creality K1C - K1 including LED rails

Ocena
0 / 5
Polubienia
30
Pobrania
165
Wydruki
0
Wyświetlenia
839
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I enjoyed this print so much that I wanted to do it again and add some upgrades. The one in these photos is the final test print before I buy a new roll of ASA and complete the final version. I liked the contrast, so I thought I’d share these pictures.

When I originally made this, I wanted to include hinges so I could still use the K1C lid. I also wanted to orient the lid so the side with the handle faced the front, allowing it to be used as an actual handle. After a bit of trial and error, I finally got it right and it works great! The K1C riser didn’t have a place for the hinges, so I made some adjustments to accommodate them.

Building on the creator’s great original idea of push-in hinges, I added a push-pin locking mechanism. Since I do quite a bit of TPU printing, I wanted the lid to be easy to remove. I made the pins slightly smaller so they fit more loosely, and added the pin lock to keep them securely in place.

With the lid rotated 90 degrees, it also created an opportunity to add a sliding cover for what was the rear opening. This has worked out really well, combined with the vents in the riser, you can open the slide during PLA prints (and similar materials) to maintain good ventilation while keeping the lid closed.

I added a tight-fitting hole at the back right corner for the tubing to feed into my filament sensor, which is now mounted on a movable HSW wall.

Lastly, I designed corner mounts that screw onto the unit instead of using loose clamps.

Again, a BIG thank you to @Sprintech_1983460. This is by far my favourite mod for my printer, and it has enabled me to create so many awesome prints.

If you have any issues with the print or any questions, please let me know—I’m happy to help.

Happy printing!


UPDATE: 02/10/2026

I’ve added a side frame to fit an 8mm 24V LED strip. You can print frames for all sides as I did, or just for the side you prefer. I’ve also included my Orca project file with the settings I used for PolyLite ASA.

See the attached pic of the LED strip I used. This can be used as ONE peice and only needs to be soldered at one point. (MAKE SURE ITS 24V)

If you have any questions, feel free to ask.

UPDATE: 13/05/2026

I had a request to supply the parts in seporate files to make it easier so I have seporated them a bit. 
The lid clips are NOT print in place so make seporate the parts in your slicer before printing.  
If you dont want to use the Skull on the left corner you can just print the front right one twice. 

If you would like a print file that shows the orientations that I printed them in let me know and Ill get on it. 

Happy printing. 

Tagi