Dungeon Crawler Carl logo (magnet or pin!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The logo for the acclaimed series Dungeon Crawler Carl by Matt Dinniman!
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello crawlers!
Dungeon Crawler Carl is my favorite series at the moment and in anticipation of the 8th book, I'm doing a full reread. I've been wanting some DCC stuff for my house and I've also wanted to try making my own magnets, so this seemed like the perfect first project for that. I recreated the logo in Inkscape and exported to Tinkercad to make the model.
I have 2 sizes with 3 variations. Each print profile includes a roughly 2 inch wide version and a roughly 3 inch wide version. I've provided print profiles with holes for 10mmx2mm magnets or 5mmx2mm magnets, as well as one with a fully flat back if you prefer that. I kind of went a bit crazy with the 5x2 magnets because the ones I have are exceptionally weak. Feel free to reduce the number if you have stronger magnets. All the magnet holes are done via a simple negative cylinder part so it should be easy to customize to your own magnet size if you don't have either of these.