Liczymy pasujące modele…
I recently made the switch from DCC++ to DCC-EX and with that I upgraded to the Arduino Mega, ESP-01 for wifi, and a .96" display to show the ip address. This system can also be connected via USB to a computer running JMRI if you need to…
It should print without supports in the default orientation. If you would like a contrasting infill color to the DeWalt text, change the filament at the appropriate layer. I added a V2.0 which more closely resembles my other DeWalt tool…
This is a bottom mount case and faceplate for the older style PowerCab panel, NCE 5240222. This case fits the model with the single connector in the back. The newer style has two connectors, which this will not fit. Printable Models Case…
This is a set of pieces that can be used to recreate the Steve Rogers Captain America (San Diego Comic-Con 2016 Exclusive) figure originally published in 2016 at 500% scale. This is a rare figure that was exclusively available to…
This wall hanger uses 3 screws to secure the mount to the wall. It will hold the Dewalt tire inflator with or without a battery inserted.
A friend asked if I could make a few of these for his scale train layout. He brought me a broken one and I modeled this replacement, I printed a few and they were happy with them. It looks like it"s one of these -…
I liked @Nebbish's DCC-EX case, but it didn't fit my hardware, since I'm using the EX-Motorshield8874, not the Arduino Motorshield. This adjusts the side ports to fit the 8874. I also found the fit of the microcontroller a bit too loose…
In 1782, the Eye of Providence was adopted as part of the symbolism on the reverse side of the Great Seal of the United States Print Settings Rafts: No Supports: No Notes: Easy to print no raft or support required Category: Art
I could not find any dice holders for Dungeon Crawl Classics dice on Printables or Thingiverse so I designed my own. I made it thin to print quickly. This is my first of these dice tray designs. When I create more I will link them here as…
To complete the model following parts are needed: 4x led white 3528 2x Led red 0805 4x SMD Resistor 1K5 1206 1x esu 51968 or LaisDcc 860042 2x M2x4
Case Central Station DCC-EX with Arduino Mega WiFi and oled 1.3
This is a small rack to hold and power my complete DCC++EX setup. I am using Raspberry Pi 4B that runs JMRI, an Arduino Uno or Mega with either the DCC++EX motorshield or the standard Deek Robot (Arduino clone) motorshield and an Arduino…
This is a set of pieces that can be used to recreate the ATOM (San Diego Comic-Con 2016 Exclusive) figure originally published in 2016 at 500% scale. This is a rare mini-fig that was exclusively available to attendees of the San Diego…
I use this case for my DCC-EX station. But it sure can be used for other Arduino projects. The Arduino Mega can be supplied with power via USB or a power supply unit. I have provided a DC built-in socket for the power supply for the motor…
DCC Ex Case - Built using a ESP32 D1 R32, Deek Motor Shield and OLED 0.96 SSD1306.
Giggle One of my favourite characters from the last book, picturing him appearing over Gustavo, giggling then cannonballing through his back end gets me every time. He currently sits on a shelf above my bed, I can hear him giggling…
Decoder base for H0 Modeltrains. Fits perfectly ESU-Decoder Lokpilot V4.0 and V5 Designed for older models without digital interface. Designed for 8pin NEM652 plug. Different versions to install the cable. print like picture no. 6…
DCC-EX case, acommodates the Mega with DCC-EX motorsheild, wifi sheild and a side mount for a PCA9685. Power for the PCA9685 is coming from a 12 volt to 5 volt DC-DC converter soldered in to the extra pads near the barrel connector on the…
Case for building a hardware DCC-EX Wifi controller (DccEXController of WiTcontroller) Software can be found here: flash62au (Peter Akers) (github.com) This controller can both be used with the WiTcontroller of the DccEXController…
Inevitably the battery cover on your DT400/1/2 throttle will break. You may go insane trying everything from duct to electrical tape to keep the 9v battery contained. But eventually, that battery will simply fall out at the most…
Designed this part to hang my new DEWALT DCC020I inflator on the side of my Craftsman toolbox. I also created a variety that will screw into the wall using four countersunk holes. I'd print using PETG if you're using out in a garage or…
3D printable case and lid designed to hold an Arduino Uno and motor shield for DCC-EX. Uses 8 m2x4 screws to secure the boards and lid in place. Version with and without mounting holes. Mounting holes use 4x m4 screws for mounting.
Case for the latest Mega/motorshield8874 variant of DCC-ex. Designed to have this excellent lcd stand on top. https://www.printables.com/model/290804-20x4-lcd-stand Designed/printed for/with 0.8 nozzle to speed up the print. Should work…
This is a HO Scale cover for the DCC access hole. this variant is for an EMD GP38-2 with and without dynamic brakes Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Post-Printing Maybe a little sanding…
Remixed the case by Nebbish to work with the MakerFab Wifi shield. I also widened the hole for the motor shield 8874 and added some text. NOTE 5.29.24 I didn't account for the reset button or the jumper wires originally because I was…
I recommend printing this in PETG. Please turn support generation on - the only support generated is under the 3 small lids and in the 2 holes. They are very easy to separate.
Simple model for a dice holder for DCC, MCC, and XCC games, I suppose you could use it for other dice games as well. Enjoy and feel free to tip if you find the value!
můj první model ale snad někomu bude dobře sloužit.
See also the new version with air vents . As I didn't really liked the original housing of the CV-Programmer by mXion, I just created an alternative. To prevent the electronic board from moving inside, I suggest to add a small…
The thread on my hose connection is the wrong way round so that it cannot be turned onto the hose. This adapter has the thread with the correct orientation
New version of the initial model of the case . Now having air vents as the device may get quite warm. Additionally, the case has a small guide to help you insert the optional ‘Tag Connect’ cable into the socket in the correct orientation.…
Ich habe eine DCC-EX-Zentrale mit einem Mega 2560 Board, einem L298HN Motor Shield und einem ESP-01 WiFi-Modul aus einem Teile-Kit gebaut. Für meine kleine Schmalspurbahn im Maßstab 1/120 (TTm) wurde ein 9-mm-Spur Programmiergleis (Trix…
These two adapters are for the intake and exhaust sides of a Therm-a-Rest TwinLock valve set. They adapt to the low pressure, high volume hose of a Dewalt DCC020IB inflator. I would recommend both be printed in TPU, especially the female…
These are the STANDARD drawer inlays(Bins) for the Spare Parts Storage Cabinet. They are posted separately because there will be more themed cabinets so why post all the files on every project. Beside, it is easier to keep track of the…
Amphitheater Dice Tray with DCC Font, originally I sold these, but I'm on to other projects and wanted to offer these to the dice game world out there, feel free to throw me a tip! I have a lots of different kinds of these trays but this…
I made this Hall H sign to celebrate our SDCC@Home.
Držák složí k odložení myši
This box comes in versions with and without ears for mounting to the bottom of your layout. Use M3x6x5 threaded heat insert nuts and M3 screws to hold the board. The holes on the ears are sized to fit #6 pan head wood screws. Also…
This little modification is needed for aspirator hose connect to your heater box to proper work of interior temp sensor. This is the scond version. I am designed only the bottom part of adapter. So you need the JDM part and cut down like…
This is a mount to fit your EKWB DCC pump onto a Thermaltake core P3 case stock water bracket. This goes between the pump and the stock case bracket to mount securely and look good. This uses the stock EKWB DCC pump screws and a set of…
30mm blower adapter (yellow part in the picture) for the original blower hose adapter or in combination with this: https://www.printables.com/de/model/899140-dewalt-dcc018n-hose-adapter
Dvoudílný držák modulů DCCDIP2 od firmy Ignitech pro zapalování motoru Rotax 912. Držák je navržen pro montáž na místo mimo motorové lože letounu.
An idea for Dungeon Crawler Carl Mantaur
The DCCS620 is a great chainsaw for woodworking and overlanding but it leaks. There are partial fixes for this, but it still will weep a little bar oil. Really all chainsaws do. So I made this tray to keep the bed of my truck and floors…
These are the drawers for the 3D Printer Spare Parts Cabinet with longer handles. This is also where the longer handles . The Main Spare Parts Cabinet: Bambu Theme can be found HERE. Rat Rig Theme can be found HERE. Army Theme can be…
By adding this to a DCCConcepts Cobalt IP point motor (not included!) you are able to uncouple OO gauge tension lock (hook and loop) equipped rolling stock using a DCC model railway controller. Add the point motor as usual to the…
I needed to stow away a Maerklin / Trix train DCC Train remote controller underneath a table. All this needs is a double sided adhesive tape with a width of 1.3mm or ½ Inch. This is more then enough to hold the box and the control in…
Remix of DCC-EX case by Mario Andrioletti. Uses original base plate but with taller enclosure in order to accommodate Arduino + Motor Shield + Wifi Shield.
This is a housing for the DCC Pola utility created by fichtelbahn.de (https://www.fichtelbahn.de/dcc_pola.html). The tool helps locating the right polarity on digital modeltrain layouts. I wanted some protection for the naked PCB. Both…
There is not much to it, just a small peg to keep the protection door open. Ive printed mine in PLA, but virtually every kind of filament will work, well except flexible ones of course.
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement stand that will allow the…
stačí vyvrtat 2 dirky na plíšku z boku (vrták dle potřeby)
Golf 6 Mittelkonsolen Blende (Schalterreihe) Inklusive DCC Knopf aussparungen
Made a case for the mega with wifi shield varient of DCC++EX. It's styled after a Union Switch & Signal signal box, with my own flair on it, of course. It'd would be pretty easy to change the text in something like tinkercad for your own…
(French follows) Lenz was the creator of this diode bridge for detecting the presence of trains on the rails. This home made model features both a case and a soldering aid for the 5 1N4001 diodes. The case is designed to be screwed…
Modification of screen top piece for non screen builds. Also added option without the reset hole.
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost. Here's a replacement end-cap style stand that…
Do you live in fear of tipping over your bottle of flux? (As I used to!) Hopefully this bottle stand for your excellent DCCconcepts Sapphire flux will end your fears! Made in Tinkercad https://www.tinkercad.com/things/9dDf2mDl6ZD-flux-pot
We have a bunch of old Athearn blue box locomotives that we rewired for DCC many years ago. This process adds a mess of wires that we just stuffed inside the locomotive, gluing the decoder to the top shell along with a light bulb for the…
Easily convert your LGB Automatic side dump car to DCC with this adapter for a Massoth single channel accessory decoder : Screw the adapter onto the chassis (use one of the existing central screws). The decoder is screwed onto the adapter…
Bookmarks inspired by the Dungeon Crawler Carl series 0.4mm nozzle 0.12mm layer height
Это неофициальный 3D-печатный аксессуар для гвоздезабивного пистолета NailTask DCCN. Деталь устанавливается на пятку инструмента и создаёт третью точку опоры , что значительно повышает устойчивость и точность позиционирования при работе,…
This is a set of pieces that can be used to recreate the Steve Rogers Captain America (San Diego Comic-Con 2016 Exclusive) figure originally published in 2016 at 500% scale. This is a rare figure that was exclusively available to…
35mm DIN rail bracket for the EX-CSB1 Has recess for M3 nuts/screws Sized for mounting the printable CSB1 case with tabs:
Remix of DCC-EX case by Mario Andrioletti. Uses original base plate but with taller enclosure in order to accommodate Arduino + Motor Shield + Wifi Shield.
This wall hanger uses 3 screws to secure the mount to the wall. It will hold the Dewalt tire inflator with or without a battery inserted.
35mm DIN rail bracket for the EX-CSB1 Has recess for M3 nuts/screws Sized for mounting the printable CSB1 case with tabs:
Updated ATU-100 case for genuine N7DCC Designed style of boards. The original design doen't have enough room for the boards with the genuine Red Toroid inductors' I have also updated the rear cover to take to more popular (and more widely…
The Alien Box supplies a DCCduino, which has larger pins on the top. The mounting hole on Dsk001's model is too small for this particular Arduino Nano variant, so this is a quick and dirty adjusted model to compensate. No other changes…
