Stand for Comsol DCC120 USBC/A Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement stand for Comsol laptop power supply
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a Comsol DCC120 USB C & A power supply when I travel on business. It runs my laptop and charges phones etc - a very handy bit of kit. It was supplied with a stand that I promptly lost.
Here's a replacement stand that will allow the power supply to remain vertical and run cooler. I've designed it with a loose fit so that it's easy to assemble/disassemble whilst moving from site to site. It disassembles to three flat bits that take next to no room in my laptop bag.
I printed mine out of PETG - as the power supply can get ‘warmish’ if it's working hard.
No supports are required. 15% infill should be plenty as would two or three perimeters.
There is one spine piece. You will obviously have to print two of the cradle pieces (identical).
Edit: Have added the STEP file from OnShape for those would like to play with it.