Liczymy pasujące modele…
Mount for the KUSBA Input Shaper working with all Ender S1 Models. There are two mounts: One which is mounted on the extruder. You'll need to temporarily remove the M3x6 screw and use a M3x10. (see pictures) One which is mounted on the…
Covers the busbar (and the nuts!) to reduce the chance of a short circuit. Available in 2x and 4x cell configuration. Friction fits on 11.2mm nuts - this allows clearance on any BMS wires/attachments. No supports required - designed to be…
Enclosure for Programmer AVR compatible with USBasp ISP. The enclosure consists of two parts. M2 nuts should be placed in the bottom part. Both parts are screwed together using 8mm long M2 screws.
I needed a support for my 7.1 Audio sound card in my virtual pinball. I could not find one so I made that version.
A simple case for yet another USBasp dongle. This one has “USBASP v2.0 LC Technology” markings on it.
Please like and follow and post your makes Trophy and Husband signs
A simple case for yet another USBasp dongle. This one has “MSX" markings on it.
Ich brauchte ein paar einfach an- und abmontierbare Stützfüße um ein ausklappbares Bettgestell in unserem Campervan (VW-Caddy) abzustützen. Ich teile sie hier zur Inspiration, zur Anpassung und/oder zum Remixen. Die Sützfüße lassen sich…
🇩🇪 Deutsch Phasenschienen-Berührungsschutz (Schneider kompatibel) Dieser 3D-gedruckte Berührungsschutz für Phasenschienenkontakte wurde für Schneider Electric Phasenschienen entwickelt und kann auch mit baugleichen Phasenschienen anderer…
The kusba is mounted with 2 M3x6mm bolts. The holes to mount the kusba are designed to be threaded with the bolt as its being screwed in. I found best results with the simple bed mount were it lying upside down, and putting support…
Busbar cover for cuprum busbars. Typically sold on nkon.nl, but can be found on Aliexpress and Temu also.
Printed in 0,2mm PETG. The terminal covers are with an hole for temperature sensors and an cable-tie attachment. The busbar are just to click on and slide together. All tight fit for car use.
This is safety part of electrical and electronic wiring for a Comb Busbar to protect the ends of cut busbars from being touched accidentally in a live panel. This was made for a 2P busbar and fits snug.
Print: on its side. good result with PLA 0,2mm layer height Disclaimer: This is not an original FTG part. This model is provided with no warranties express or implied. When using it, you are doing so at your own discretion and risk.
Print: on its side. good result with PLA 0,2mm layer height Disclaimer: This is not an original Schneider part. This model is provided with no warranties express or implied. When using it, you are doing so at your own discretion and risk.
This magnetic mount will allow you to measure any axis from any point without a printer specific mounting solution. This is designed specifically for the KUSBA adxl345 accelerometer. You will need to pause your print before the hollow…
Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem: Materiały ze składania magazynu na tej obudowie: - Jeżeli chciałbyś zapoznać się z…
Printed based on the instructions of the original: 10 % infill Supports enabled - buildplate only. Printed in petg.
This is a simple mount to attach the KUSBA USB accelerometer to a 3d printer bed up to 7 mm thick. All you need is two M2 screws to mount the KUSBA, a long M3 screw and one M3 nut.
Make your own aluminium Busbars with this form. Cut a stripe, insert, press, fold, press & fold until desired thickness. Printed in PLA, 100% infill, 0,2 layer height. Holes are for weird 4mm studs that came on Oyestore Aliexpress…
This is a very sturdy mount for the KUSBA 2.4 accelerometer for the prusa mk3s+, to help tune input shaping with klipper. Requires you to heat insert 2 standard M3 nuts. Until they are just flush with the surface, can be done with a…
This print allows for resonance compensation tuning using the KUSBA on the Creality Ender-3 S1 with large cooling mods such as the Taurus V5 installed. You will also need: 2x M3x8 screws (replaces the stock M3x5 screws; holes are not…
A simple adapter to mount a KUSBA ADXL on a Mellow Nozzle Mount. You need 2x M3 screws and 2xM3 nuts. I used M3x8
These clips are designed for single-handed operation and secure attachment of lids on culture tanks of multi-tank systems such as those manufactured for zebrafish by Aquaneering and Aquatic Habitats. They use an elastic band for to pull…
Simple plate for mounting the KUSBA Klipper USB Accelerometer (v2) I designed it to be attached to other mounting stuff I was designing; this was originally a common component that attached to things that would attach to the bed for Y…
Learning to 3d model scale items. This is a model of the busbar for a Yinlong 66160 LTO 45ah Cell.
When I'm traveling I like to carry as USB flash drive with certain tools such as a bootable OS and selected travel information in case of emergency. I was unable to find a solution that was not obviously a USB flash drive, so I designed a…
KUSBA is 23.5 mm c-c hole mount, this is a remix for the larger profile
Can now mount a Kusba accelerometer to the adapter and no longer have to mount/unmount ever again :) Just plug in a USB
Download Project Shield for Busbars terminals LFP 280Ah. Shields prevent accidental short-circuit, additionally protect terminals from damage: Materials from the assembly: ----------------------------------------------- - Facebook Group:…
Ich brauchte ein paar einfach an- und abmontierbare Stützfüße um ein ausklappbares Bettgestell in unserem Campervan (VW-Caddy) abzustützen. Ich teile sie hier zur Inspiration, zur Anpassung und/oder zum Remixen. Die Sützfüße lassen sich…
Magnetically attach either a KUSBA USB-C or BigTreeTech USB-C ADXL345 accelerometer to your bed slinger using eight 10mm neodymium magnets. Push magnets in using the back end of a sharpie marker. The magnets can help you store the device…
Simple busbar for connecting JLR IPace battery modules together in an EV Conversion or other project. A 3D print car be used as a drilling / cutting template or use the included DXF files with a CNC plasma or other automated process. I'm…
This is my prototype :) - If it does not fit 100% simply use some force or a lighter to heat the connection points up slightly! Should fit most of the common USB Sticks! Have fun! Recommended to print with dual material (PLA & PETG…
Sammelschiene für 12/24V Systeme Update V2 Der Träger wurde überarbeitet, die Schraubenköpfe haben jetzt Kontakt zur Kupferschiene. Die Heat Inserts wurden durch M4 Muttern ersetzt. Die Kupferschiene wir durch 2x M4 Schraube am Träger…
This is a remix of original model here https://www.printables.com/model/892072-victron-lynx-power-in-busbar-cover
This is a quick remix of a terminal cover set for most 280-310Ah LiFePO4 Prismatic Cells. The original files for the busbars were well designed but unfortunately quite weak and so would consistently split apart when I tried to snap them…
Für den Ausbau unseres MiniCampers habe ich diese Schrankverriegelung konstruiert. Der Schrankgriff besteht aus zwei Komponenten, die mithilfe einer Mutter und einer Schraube (M6x22mm Lisenkopf) miteinander fixiert werden. Zur…
Attach the KUSBA USB-C or BigTreeTech USB-C ADXL345 accelerometer to the bed holder using twelve (Maximum, you can try using less, say eight, but I'm not sure about the result.) 8 x 3 mm neodymium magnets. Adhere them with adhesive,…
PETG should be used as non-flammable or less-flammable material. 15% infill is enough.
I had enough to have an ADXL345 with a Raspberry Pico hanging around so i bought a Kusba. In my case i printed it in PLA+ but being so close to heated parts PETG or ABS would be ways better (i still have to test the one i printed in PLA…
🇩🇪 Deutsch Phasenschienen-Berührungsschutz (Schneider kompatibel) Dieser 3D-gedruckte Berührungsschutz für Phasenschienenkontakte wurde für Schneider Electric Phasenschienen entwickelt und kann auch mit baugleichen Phasenschienen anderer…
If your PC mainboard has a 19-pin header for 2x USB 3.x connectors and a 20-pin Type E (Key A) connector for USB-C, you can use a PCI-E bracket kit to house the external facing connectors: https://amzn.to/3YgYJbq But if you want to have…
Meanwell SP-200 series busbar cover with cutout for a AC-14-F16A power switch
Simple prototype model and build of a jerkstopper for USBA-Male to USBA-Female cable. I printed this in a low resolution setting and it worked so well I didn't bother to optimize it. This can easily be modified to reduce material…
Dies ist der Innenausbau des Pistenbullys im Maßstab 1:14 Dieser Innenausbau ist kompartiebel mit diesem Pistenbully Modell: PistenBully 1:14 R/C - Pinshape Das Original Modell ist von Peter Sorgen Dieser Innenausbau wir an einem Stück…
The kusba is mounted with 2 M3x6mm bolts. The holes to mount the kusba are designed to be threaded with the bolt as its being screwed in. I found best results with the simple bed mount were it lying upside down, and putting support…
Verbinder, um Möbel im Wohnmobil ohne Haltewinkel zu konstruieren. 25mm Durchmesser und nur 7,5mm hoch, um auch in 9mm Platten eingebaut werden zu können Abdeckung ist noch etwas tricky... Gedruckt in ASA 0.2, 3 Perimeter, 3 Top/Bottom…
Busbar cover for cuprum busbars. Typically sold on nkon.nl, but can be found on Aliexpress and Temu also.
Printed in 0,2mm PETG. The terminal covers are with an hole for temperature sensors and an cable-tie attachment. The busbar are just to click on and slide together. All tight fit for car use.
This is safety part of electrical and electronic wiring for a Comb Busbar to protect the ends of cut busbars from being touched accidentally in a live panel. This was made for a 2P busbar and fits snug.
Print: on its side. good result with PLA 0,2mm layer height Disclaimer: This is not an original FTG part. This model is provided with no warranties express or implied. When using it, you are doing so at your own discretion and risk.
Print: on its side. good result with PLA 0,2mm layer height Disclaimer: This is not an original Schneider part. This model is provided with no warranties express or implied. When using it, you are doing so at your own discretion and risk.
USB and USBc Front IO panel for Mac Pro 1.1 "cheese grater" mod Front IO panel replacement for Mac Pro case conversion. It fits two USB-a ports and one USB-c port. [no audio jack because I couldn't find an HD audio cable with a single…
Printed out of ASA with shrinkage compensated, 0.2mm layer height. Clicks in it's place over the busbar. Compatible with with: Eve LiFePo4 LF304 Terminal Cover Eve LiFePo4 LF304 Wirebox
Cover to be used in addition to the silicon covers provided by Victron. I was looking for a more finished look compared to the ends of the busbar just sticking out. The cover can be screwed to the backboard with a 4x30mm screw.
Designed for this model: https://s.click.aliexpress.com/e/_c4e1uPJp Designed this enclosure for the USBASP programmer. Provides a compact and durable case that protects the PCB while keeping all connectors easily accessible. It offers a…
Small desktop creature for holding up to 10 thumb drives. Example printed in Polyalchemy Elixir. Print settings : Infill : 10% Supports - YES - buildplate only. NB. removed supports from vertical faces Enjoy. PS. If you print it, please…
Case for the USBasp. This is for the version with the horizontal 10P connector. With so many versions available you have to check with yours if it will fit. Category: Tools
One piece case for USBasp board (the black one). My case has the holes for LEDs and uses pieces of clear filament as light transmitters. There is also cutout for the 5V/3V3 switch. When the board is in case it can be set with help of a…
Programátor: https://pihrt.com/elektronika/390-programator-atmel-isp-usbasp Post-Printing Category: DIY
KUSBA and Fysetc Accelerometer mounts for Mosquito hot ends , mount directly to the 25mm fan
a nearly universal mount for a KUSBA accelerometer some times mounting the board hanging off the end is necessary for the usb cable to clear the umbilical note: the hole pattern is different to the adxl345 uses a screw to clamp to the…
A frame to hold a copper bar acting as a busbar for high current connections at 12/24 volts. Print Settings Rafts: No Supports: No Infill: 35% Filament: addNorth PETG Category: Electronics
Parts needed 9x M8 screws 9x M8 nuts 130x20 mm copper sheet Assembly manual Cut a copper sheet to a 130x20 mm strip. Drill 7 8mm holes into it. Place it into the holder and secure it with 7 M8 screws. The cover is also secured with M8…
Busbar protector made around tipical 20x90mm for 280Ah LiFePo4. Depending on your printer, aditional supports recommended on the holes. Any material. Mines are tested and produced with PLA+
A quick mount to attach the KUSBA ADXL to an H2 extruder. There is also an 80mm print with mounting holes for the KUSBA that should fit between binder klips on a bed slinger. -Added an offset mount for cases where the part cooling fan may…
Intro This is a simple case/holder/cover for Yubikey 5 series USB A and USB C. Note that the versions do differ: so print USBC for USBC key and not USBA for USBC key! Info It can be printed without supports. I printed it with 0.12 layer…
Intro These are two simple CAD 3D models of Yubico YubiKey 5 Series security keys ( https://www.yubico.com/products/yubikey-5-overview/ ). USB A .step file and USB C .step file versions are included. Measurements were done with caliper.…
This is a remix of the Rat Rig V-Minion Bed WAGO mount by Squirrelbrain with a mounting option for the KUSBA USB Accelerometer (ADXL345) for Klipper . I recreated it from scratch using measurements from Squirrelbain's STL as accurately as…
Well-fitting mounting cage for the genuine E3D Titan Aero Extruder on an Anycubic Kobra. It also has 2 mounting holes for a KUSBA PCB (maybe also suitable for ADXL345 PCB. Works with all stepper motors including the stock Anycubic Kobra…
I tried my best to find a mount that would let me use two screws to secure his ADXL board. But due to the odd hole pattern, it was hard to find anything beyond an extruder mount or afterburner. So i was using just 1 screw. However this…
Mount for KUSBA (V2) adxl on BIQU H2 and Bed Slinger https://github.com/xbst/KUSBA KUSBA - “Klipper USB Accelerometer” A PCB designed to make Klipper's input shaping much easier by simplifying the wiring and config for measuring…
KUSBA mount, for use on printers making use of Detlef01's Titan conversion . Mounts to the inserts for the highlighted redundant “endstop” component
AnyCubic Kobra KUSBA Extruder Mount remix Thanks to the original designer, I made a quick remix to fit my needs. Remixed to increase the thickness of the plate where the KUSBA mounts in order to allow for use of M3 8mm screws to mount the…
Hey, This is very simple adapter for Biqu H2 (V2) extruder to mount KUSBA 2 on top of it. I've printed in PETG with 50% infill, but any other material should be fine as well. 2x - M3 8mm screws to mount adapter to extruder 2x - M3 4mm (or…
I used the mount hole locations from the "KUSBA mount for spite" and used the mount holes from the "adxl343 mount for microswiss" for the location on the NG extruder. Can be either used as a press fit as it holds quite well or use a 12mm…
This is an easy to print cover for busbars to avoid shorts. It covers all metallic surfaces. clicks onto the busbar It has a slot for voltage taps (L and R version have slightly different location) Has space for 2 mm insulation between…
Uses 2 m3 heat-set inserts or 2 m3 nuts. This is still a work in progress. Any advice on any changes to the design and any remixes would be appreciated. IF you would like to support me:…
A simple mount for a Kusba accelerometer to mount to the buttom two screws on the Voron Afterburner toolhead. **updated to make the holes for heatsets slightly larger. ** Use 2 M3x5x4 heatset inserts (Voron BOM spec). Use 2 M3x6 BHSC to…
A mount for using the Klipper USB Accelerometer ( KUSBA ) with the Elegoo Neptune 3 Pro Printer (Plus / Max are also likely to fit but were not tested). You will need two 20mm M3 screws to attach to the extruder and two .8 M3 screws with…
A mount for using the Klipper USB Accelerometer ( KUSBA ) with the Elegoo Neptune 3 Pro Printer (Plus / Max are also likely to fit but were not tested). You will need three M3 .8 screws with matching hex nuts to attach the KUSBA to the…
Kusba Accelerometer mount designed for the Satsana Dual 5015 Fan Duct. Very simple print, extremely sturdy with locating pins. Supports 4010 fans and 4020 fans. Simply unscrew the two top screws for your fan and put the two locating pins…
The lid is meant to be printed in a translucent and the case in an opaque material. You need to glue them together after inserting the device. It should fit and after gluing it should not move inside anymore. Make sure your printer is…
Hello! Since I didnt find a mount for the ADXL345 from Kusba, I made one myself. I'm new to 3d printing and especially CAD but I tested the mount and it works. It is designed to hold the Kusba with double sided tape, it fits snug and…
This is a simple mount to attach the KUSBA Usb accelerometer to almost any 3d printer. All you need is a few M3 screws. Please note that this is only used to run input shaping and then should be taken off so that your heatsink gets proper…
This is a simple mount to attach the KUSBA USB accelerometer to a 3d printer bed up to 7 mm thick. All you need is a few M3 screws and one nut. Check out my universal hot-end mount
Print in ABS, ASA or PETG if you are enclosing the printer to avoid the plastic deforming. Easy to print with no need for supports or heat-set inserts. The lid will keep dust away and it also has standoffs that will press the…
This is one of my first designs so any feedback is welcomed! I made this mount to hold the KUSBA on my Dragon Burner toolhead for V0.2. I printed it in ABS 0.2 mm layer height with no supports. (I expect any filament would work)…
I designed this simple KUSBA Accelerometer holder for @hangloose y-axis linear rail mod from here: https://www.printables.com/de/model/372792-anycubic-vyper-y-axis-linear-rail-mgn12h Just replace two screws from the mentioned mod with…
I've pre-oriented the parts for their optimal orientation without supports. KUSBA mounts at the top where the threaded inserts are with 2 m3 screws. Uses the same bottom if you already have that printed Use the default The 100 print…
I designed a custom busbar holder for my Victron ESS system without fuses for the negative terminal. Just add a 40x5mm copper bar and use M8 bolts/nuts. You can find a variant with ANL fuseholder for positive terminal in my profile as well.
I designed a custom busbar an fuse holder using ANL fuses for my Victron ESS system. You can print as many as you like an snap them together, just add a 40x5mm copper bar on top with M8 bolts.
This is a remix of Koop's design of the Mount for the Klipper USB Accelerometer board compatible with MicroSwiss NG extruder. As the original, this remix is compatible with KUSBA v2.3 and v2.4. I changed the design to insert M3 nuts…
